Maximum Utilization of Cocopeat Waste as a Substitute Material for Fine Aggregates On Paving Blocks Was Engineered

Dwi Kurniati

Abstract


Waste utilization can be done in various ways, one of the wastes used in this study is cocopeat waste. Cocopeat is a coconut pulp powder commonly used to cultivate plants. But this time, this waste is processed into a paving block mixture. The goal is to find out the strong press and quality resulting from the utilization of cocopeat in the manufacture of paving blocks. The method used refers to SNI 03-0691-1996. The first step of coconut pulp is destroyed, then used as a paving block mixture as a sand substitution. Cocopeat substitution paving block testing with percentages of 0.6%, 0.8%, 1%, 1.2%, 1.4%, 1.6%, 1.8%, 2%, and 2.2%. The total compressed strong test sample conducted amounted to 90 pieces with a test object size of 150x100x60 mm. The average compressive force generated by each percentage is 0.6% of the 14.71 MPa, 0.8% of 13.56 MPa, 1% of 13.76 MPa, 1.2% of 14.74 MPa, 1.4% of 14.13 MPa, 1.6% of 13.08 MPa, 1.8% of 12.43 MPa, 2% of 13.22 MPa, and 2.2% of 10.33 MPa. In conclusion from the test results, cocopeat substitution paving blocks have an average grade C quality that can be used for pedestrians, so this mixture can be recommended.

Keywords


Cocopeat; Compressive Strength; Paving Block.

Full Text:

PDF

References


S. Ike Wahyuni, “Cocopeat Sebagai Media Tanam Alternatif Selain Tanah,” http://cybex.pertanian.go.id/, 2020.

D. Kurniati, I. T. Saputro, E. F. Nurhidayatullah, C. D. Saputro, and A. Asyifa, “KEKUATAN TEKAN PAVING BLOCK DENGAN MEMANFAATKAN,” vol. 7, no. 2, pp. 49–53, 2021.

Badan Standarisasi nasional, “SNI 15-2049: Semen Portland,” 2004.

SNI ASTM C136, “Metode uji untuk analisis saringan agregat halus dan agregat kasar ( ASTM C 136-06 , IDT ),” Badan Stand. Nas., pp. 1–24, 2012.

Badan Standar Nasional, “Bata Beton (Paving Block),” Sni 03-0691-1996, pp. 1–9, 1996.

D. A. T. Jahari, “Jurnal-Dessy-Anggun-TJ,” Pengaruh Penambahan Limbah Sludge Ind. Tekst. Sebagai Bahan Campuran Pembuatan paving Block, 2018.

D. Asra, D.A., Bakar, A & Novirani, “Analisis Kelayakan Usaha Produksi Paving Block Dari Bahan Limbah Fly Ash Batubara,” J. Inst. Teknol. Nas., vol. 03, no. 2, pp. 363–374, 2015.

dkk Melinda, “PEMANFAATAN SERAT POLYPROPYLENE UNTUK MENINGKATKAN KUAT TEKAN MORTAR DAN KUAT TEKAN PASANGAN BATA,” vol. 7, no. 3, pp. 176–180, 2020.

Suwarno and F. Nursandah, “Pemanfaatan Limbah Keramik Sebagai Pengganti Koral Pada Campuran Beton Mutu Tinggi,” J. CIVILLa, vol. 4, no. 2, pp. 256–261, 2019.

L. Opirina, D. P. Sari, and R. Reskuna, “Kuat Tekan Beton Dengan Substitusi Limbah Pengolahan Kelapa Sawit,” J. CIVILLa, vol. 5, no. 1, pp. 368–375, 2020.

Badan Standardisasi Nasional, “Spesifikasi Mortar untuk Pekerjaan Unit Pasangan,” Sni 6882-2014, 2014.

D. Kurniati, “Penguatan Kapasitas Lentur Beton Dengan Pemanfaatan Limbah,” J. Media Tek. Sipil, vol. 16, no. 2, pp. 86–91, 2019, doi: 10.22219/jmts.v16i2.6522.

M. Qomaruddin and S. Sudarno, “Pemanfaatan Limbah Bottom Ash Pengganti Agregat Halus Dengan Tambahan Kapur Pada Pembuatan Paving,” Rev. Civ. Eng., vol. 1, no. 1, pp. 13–18, 2017, doi: 10.31002/rice.v1i1.537.

A. Riadi, H. Maizir, and R. Suryanita, “Perilaku Mekanik dan Fisik Bata Ringan Akibat Terpapar Suhu Tinggi,” J. Rekayasa Sipil, vol. 17, no. 1, pp. 72–84, 2021, [Online]. vailable: http://jrs.ft.unand.ac.id/index.php/jrs/article/view/384.

B. Standarisasi and Nasional, “Sni 03-6825-2002,” Standar Nas. Indones. Metod. Penguji. kekuatan tekan mortar semen Portl. untuk Pekerj. sipil, 2002.




DOI: https://doi.org/10.30736/cvl.v7i1.791

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Indexed By :

 

Editorial Office :

Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.