Rancang Bangun Prototipe Mesin Potong Berbasis SCADA Menggunakan Mikrokontroler
DOI:
https://doi.org/10.30736/je.v6i1.572Keywords:
Cutting Machine, Microcontroller, DC Motor, SCADAAbstract
The automation that is currently developing makes work quickly completed. This automation system is widely used in all fields, especially in industrial environments. In an industrial environment, automation systems are very widely used because they require a fast production process with high yields and high quality, for example, such as the printing industry. The need for a printing machine such as a paper cutting machine is very important. Therefore this research tries to make a SCADA-based cutting machine prototype using a microcontroller so that it can be used or implemented in the printing industry. Tests that have been carried out show that the prototype of this cutting tool is capable of cutting paper to a predetermined size with a measurement error of 6,368%. From this it can be concluded that the cutting tools made in this study are good enough to be used for cutting paper and it is hoped that in the future it can become a tool that makes work easier in the printing industry.
Â
Downloads
References
Afrino, R., Triwiyatno, A., & Sumardi. (2017). Perancangan Sistem Otomatisasi Berbasis Programmable Logic Controller ( PLC ) Omron CPM1A Pada Prototype Alat Pengolah Susu Murni Menjadi Susu Pasteurisasi Aneka Rasa. Transient, 6(1), 37–43.
Ari Wibowo, F. (2019). Perancangan Sistem Otomasi Pengantar Ayam di PT. Bayu Berlian Makmur. Jurnal Teknik Mesin, 8(2), 1–5.
Basori, S., & Priyana, D. U. O. (2014). Redesain Mesin Pemotong Kertas Tipe Pemotongan Lurus Kapasitas 10 Kg / Jam. Jurnal Konversi Energi Dan Manufaktur UNJ, 1(3), 125–132.
Dasril, A. P., & Risfendra. (2019). Perancangan Human Machine Interface Untuk Sistem Otomasi Storage Berbasis PLC. Jurnal Teknik Elektro Dan Vokasional, V(1), 1–6.
Haryanto. (2018). Sistem Penyiraman Bibit Tanaman Berdasarkan Programmable Logic Controller ( PLC ). Jurnal Keilmuan Dan Aplikasi Teknik, 5(1), 7–12.
Mandala, H., Rachmat, H., & Sukma Eka Atmaja, D. (2015). Perancangan Sistem Otomatisasi Penggilingan Teh Hitam Orthodoks Menggunakan Pengendali PLC Siemens S7 1200 dan Supervisory Control and Data Acquisition ( SCADA ) di PT . Perkebunan Nusantara VIII Rancabali. Jurnal Tugas Akhir, 2(1), 990–997.
Rozie, M., & Ihwan, K. (2017). Perancangan Alat Pelubang, Pemotong, dan Pematah Kertas 3 in 1 Menggunakan Metode Ergonomicfunction Deployment (EFD). Jurnal Teknik Industri UNISI, 1(1), 56–68.
Safitra, A. F., Fauzi, A. R., Hafiyantama, F., & Septian, R. (2015). Rancangan Mesin Pemotong Kertas Berpola. Politeknik Negeri Jakarta.
Sukmono, H., Wardati, N. K., & Sutikno. (2020). Prototipe Sistem Otomasi Gerbang Irigasi Dengan Implementasi Mikrokontroler Berbasis IoT. Jurnal Teknik Elektro Dan Komputasi (ELKOM), 2(1), 30–40. https://doi.org/10.32528/elkom.v2i1.3133
Tamaji, & Utama, Y. A. K. (2021). Penggunaan Neuro Fuzzy Pada Sistem Monitoring Ketinggian Air Sungai. Jurnal Informatika Kaputama(JIK), 5(1), 164–173.
Utama, Y. A. K., Budijanto, A., & S., A. K. (2018). Desain Pengendalian Koordinat Gerak Robot Nirkabel Cerdas Menggunakan Aplikasi Android Melalui Akselerasi Gerakan Smartphone. Electrician, 12(1), 10–16. https://doi.org/10.23960/elc.v12n1.2068
Utama, Y. A. K., Hidayat, D. T., & Juniarto, N. (2021). Implementasi Fuzzy Logic Pada Sistem Monitoring Suhu Pompa Air. Jurnal Informatika Kaputama (JIK), 5(1), 154–163.
Zulaikha, S., Adria, A., & Rahman, A. (2018). Sistem Otomasi Lampu Rumah Adaptif Berbasis Artificial Neural Network. Jurnal Online Teknik Elektro, 3(2), 68–75.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
