Desain dan Analisis Antena Mikrostrip Rectangular Dengan Slot “ m †Untuk Aplikasi WLAN 2,4 GHZ
DOI:
https://doi.org/10.30736/je.v6i1.581Keywords:
microstrip, slot, gain, bandwidth, WLANAbstract
Microstrip is being developed in various wireless applications, one of them is the WLAN (Wireless Local Area Network). In this study, "m" slot was added to the center of the rectangular patch microstrip antenna which is designed using FR4 Epoxy material, also 2.4 GHz WLAN frequency band covered by the antenna. The thickness of the patch material is 1,5mm and the dielectric constant is 4,3. The Antenna is designed and simulated using CST Microwave Studio software. By changing the position of the microstrip antenna slot, several antenna parameter values were obtained including gain, return loss, bandwidth, and VSWR (Voltage Standing Wave Ratio). The microstrip antenna simulation results showed the best return loss value of -37.46 dB, VSWR of 1.027 at the resonant frequency of 2.446 GHz, and presented a gain of 3.43 dBi. From the results, the use of  "m" slot has several effecs of increasing the return loss value up to 42.63% and bandwidth by 5.17%.
Â
Downloads
References
Casu, G., Moraru, C., & Kovacs, A. 2014. Design and implementation of microstrip patch antenna array. 2014 10th International Conference on Communications (COMM).
Liu, S., Qi, S.-S., Wu, W., & Fang, D.-G. 2014. Single-Layer Single-Patch Four-Band Asymmetrical U-Slot Patch Antenna. IEEE Transactions on Antennas and Propagation, 62(9), 4895–4899.
Mathur, P., & Kumar, G. 2017. Waveguide fed microstrip antenna array using i-shaped slots at ka-band. 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.
Chen, Z., Dai, X., & Luo, G. 2018. A new H-slot coupled microstrip filter-antenna for modern wireless communication systems. 2018 International Workshop on Antenna Technology (iWAT).
Dadhich, A., Deegwal, J. K., & Sharma, M. M. 2017. Study and design of multiband antenna with V and U slot on patch for wireless application. 2017 IEEE Applied Electromagnetics Conference (AEMC).
Sotyohadi, S., Pramono S.H., Sarosa M. 2016. Design and Fabrication of “Ha ( )†Shape-Slot Microstrip Antenna for WLAN 2.4 GHz. Proceedings of Second International Conference on Electrical Systems, Technology and Information.
Henderson, K. Q., Latif, S. I., & Lazarou, G. Y. 2017. A multi-slot printed antenna excited with a microstrip line for 4G wireless systems. 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.
Bancroft, R. 2009.Microstrip And Printed Antena Design Second Edition. Raleigh : Scitech Publishing.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index