ANALISIS PENGENDALIAN ARUS DAN KARAKTERISTIK DARI REFLOW SOLDERING
DOI:
https://doi.org/10.30736/je-unisla.v8i1.822Keywords:
Solder, Suhu, Komponen SMD, Arduino Uno dan Sensor K-type ThermocoupleAbstract
Solder is a tool that serves to solder electronic components. Each electronic component has its own resistance, one of which is resistance to high temperatures. Of the types of electronic components that tend to have the lowest resistance to high temperature, SMD components are needed so that soldering tool is needed that is able to control the temperature according to the characteristics of the electronic components. In its design,this tools uses an Arduino Uno ATMega328 microcontroller as a system controller as well as several other supporting components such as aK-Type Thermocouple sensor and a relay as a temperature controller that is generated for soldering. The working system of this tool can be adjusted through the set point as the input given to the tool. The input is the carried out by the microcontroller and he instructs the sensor to start flowing heat according to the input value given. In this study, the maximum temperature reached to start heating is 11.5 C and the lowest temperature is 32.5 C, the difference between to the temperatures is 79 C and the resolution in the calculating of the measurement is 100 ms. In the results of temperature control, the smaller the delay value given, the greater the risetime value.
Downloads
References
(2017, September ). Diambil kembali dari Digiware: https://digiwarestore.com/id/digiware-news/33_cara-mudah-baca-komponen-smd#:~:text=Komponen%20Surface%20Mounting%20Devices%20atau,Surface%20Mounting%20Technology%20(SMT).&text=Untuk%20menginformasikan%20nilai%20komponen%20SMD,dicetak%20pada%20permukaan%20
Alvin Nur Fajrin, D. D. (2020). ALAT REFLOW HOT PLAE DENGAN PENGATUR SUHU. Bandung.
Diyanasari, A. (2017). Rancang Bangun Sistem Pengendalian Temperature Dalam Proses Pemurnian Pada Mini Plant Biodiesel Di Workshop Instrumentasi. Tugas Akhir, Institut Teknologi Sepuluh Nopember, Teknik Instrumentasi, Surabaya.
Diyanasari, A. (2017). Rancang Bangun Sistem Pengendalian Temperature Dalam Proses Pemurnian Pada Mini Plant Biodiesel Di Workshop Instrumentasi. Tugas Akhir, Institut Teknologi Sepuluh Nopember, Teknik Instrumentasi, Surabaya.
Farizky, M. N. (2020, Agustus). Diambil kembali dari Science and Games: https://fukanzennakagakusha.com/2020/08/16/pengukuran-resolusi/
Junaidi, A. (2017, April). RANCANGAN MONITORING KELEMBABAN TEMPERATUR RUANG INKUBATOR BAYI MENGGUNAKAN VISUAL BASIC & ATMEGA 16, 1, 1.
Kurniasari, D. (2021, April 21). Analisis Data Adalah: Mengenal Pengertian, Jenis, Dan Prosedur Analisis Data. (A. W. Davita, Penyunting) Dipetik Januari 12, 2022, dari DoLab: https://www.dqlab.id/analisis-data-adalah-mengenal-pengertian-jenis-dan-prosedur-analisis-data
Lwali, R. (2015). Thesis, California State University, Fullerton.
Maulida. (2020). TEKNIK PENGUMPULAN DATA DALAM METODOLOGI PENELITIAN. Darussalam : Jurnal Ilmiah Islam dan Sosial, 21.
Mulyadi, W., & dkk. (2020). Kontrol Adaptasi PID pada Solder Oven untuk Komponen SMD. Jurnal Arus Elektro Indonesia, 6, 58.
Phobos, M. (2021, Juni 28). Dipetik Januari 21, 2022, dari InformasainsEdu: https://informasains.com/edu/post/2021/06/alat-ukur-pengertian-klasifikasi-dan-sifat/
Pribadi, D. A. (2019). SOLDER OVEN DENGAN PENGATUR SUHU MENGGUNAKAN ADAPTASI PID (PROPOSIONAL INTEGRAL DERIVATIVE CONTROLLER). Skripsi, Universitas Jember, Program Studi Strata 1 Teknik Elektro.
Riemersma, T. (2018, Maret 03). Dipetik Januari 21, 2022, dari Compu Phase: https://www.compuphase.com/electronics/reflowsolderprofiles.htm
Saputro, E. J. (2016). Aplikasi Saklar Otomatis Untuk Pengendali Suhu Air Berbasis Mikrokontroler. Tugas Akhir, Universitas Sanata Dharma, Program Studi Teknik Elektro, Yogyakarta.
Yani, M. (2015, November 2). Dipetik Januari 23, 2022, dari JASASERVIS: https://www.jasaservis.net/istilah-dalam-ilmu-instrumentasi/.html
Zaini Latif, A. W. (2014). Rancang Bangun Sistem Pengukuran Pada Alat Kalibrasi Sensor Gas Oksigen (O2), 1, 2.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
