ANALISIS KAPASITAS LENTUR BALOK BETON BERTULANG DENGAN CAMPURAN PASIR BESI

Azwanda Azwanda, Chaira Chaira

Sari


The use of concrete for structures in the field of civil engineering in particular, is currently increasing so as to demand better concrete technology. The purpose of this study was to analyze the flexural capacity of reinforced concrete beams with alternative materials using iron sand as a substitute for fine aggregate. In this study reinforced concrete beams with subtle aggregate substitution will be compared with normal reinforced concrete beams. The experimental method used to obtain data is carried out through flexural capacity testing. The results showed that the two beams failed to bend as planned. Normal flexural beam capacity is 10,480 tons with a maximum deflection of 7,530 mm. Whereas for flexible beams with fine aggregate substitution of iron sand obtained a deflection size of 18,470 mm with a maximum load of 11,860 tons. The crack pattern on the iron sand aggregate substitution beam has a higher amount where the crack appears slowly and has a shorter size compared to normal concrete blocks. Reinforced concrete beams with fine aggregate substitution of iron sand can also slow the initial cracking in normal reinforced concrete beams.

Kata Kunci


Reinforced Concrete Beams, Flexible Capacity, Iron Sand, Aggregate Substitution, Deflection

Teks Lengkap:

PDF

Referensi


Anonim, 2004. Annual Book of American Society for Testing and Materials Standard (ASTM Standard). New York, USA

Chu-Kia Wang, Charles G.Salmon, Binsar Hariandja. Desain Beton Bertulang Edisi Keempat Jilid 1

Chu-Kia Wang, Charles G.Salmon, Binsar Hariandja. Desain Beton Bertulang Edisi Keempat Jilid 2

Departemen Pekerjaan Umum. 1989. Peraturan Beton Bertulang Indonesia, (PBI, 1989),

Dipohusodo, I., 1994. Struktur Beton Bertulang, Penerbit Pustaka Utama, Jakarta.

Mulyono, Tri., 2005, Teknologi Beton, Penerbit Andi Yogyakarta.

Nawi, E.G. 1990. Beton Bertulang Suatu Pendekatan Dasar . P.T. Erecso, Bandung.

Rafii Mohamad, Hakim M.Lukman. 2000. Pengaruh Pemakaian Agregat Pasir Besi Terhadap Kuat Desak Beton.

SK SNI T-15-1991-03. Departeman Pekerjaan Umum R.I. Jakarta 1991.

SK SNI 03-6825-2002, 2002, Metode Pengujian Kekuatan Tekan Mortar Semen Portland Untuk Pekerjaan Sipil, BSN.

SNI 03-1972-1990. Metode Pengujian Kuat Tekan Beton. Badan Standarisasi Nasional (BSN).

SNI 03-2847-2002. Tata Cara Perencanaan Struktur Beton Untuk Bangunan.

SNI 03-4154-1996. Metode Pengujian Kuat Lentur dengan Balok Uji Sederhana Yang Dibebani Beban Terpusat Langsung.

SNI 03-4431-1997. Metode Pengujian Kuat Lentur Normal Dengan Dua Titik Pembebanan.

SNI 07-2052-2002. Baja Tulangan Beton.

Tjokrodimuljo, K. 1996. Teknologi Beton. PT Naviri, Yokyakarta.

Tjokrodimulyo, K., 2007. Teknologi Beton. Yokyakarta:Biro Penerbit Teknik Sipil UGM




DOI: https://doi.org/10.30736/cvl.v5i1.405

Refbacks

  • Saat ini tidak ada refbacks.


##submission.copyrightStatement##