Protection of Labor in Realizing Labor Welfare in Construction Projects (JIIPE Manyar Gresik Construction Project Study)
DOI:
https://doi.org/10.30736/cvl.v7i2.840Abstract
In the current era of 4.0, the job market opportunities for construction services continue to develop. The Java Integrated Industrial and Ports Estate (JIIPE) construction project, which is located in an industrial area in Gresik, is an area development project that is targeted to be able to absorb a workforce of 500 thousand people. The workforce has a role in national productivity and community welfare. Therefore, the human resources of the workforce must be empowered in order to have the competence, skills, and quality optimally. The Construction Services Law Number 2 of 2017 Article 70 stipulates that every construction worker who works in the Construction sector is required to have a Work Competency Certificate. determined based on the certificate held, in addition, labor distribution and protection of workers are also not optimal, for the welfare of workers in construction projects. In this study using descriptive qualitative research . Data were obtained through interview, documentation, observation and questionnaire techniques, sampling using purposive sampling technique. Based on the results of the study, it was found that (1) JIIPE provides opportunities for local residents to become part of the world of work by looking at the appropriate competencies, (2) workers in the JIIPE area are given the opportunity to develop their soft skills. skills by participating in competency development training with output certificates of expertise or competency certificates in accordance with their fields. This is the JIIPE Manyar Gresik development project provide welfare for workers and their families.Downloads
References
BPS, “Keadaan Ketenagakerjaan Indonesia Agustus 2019,†Badan Pus. Stat., vol. 11, no. 84, pp. 1–27, 2021.
KPPIP, “Komite Percepatan Penyediaan Infrastruktur Prioritas.†2022. [Online]. Available: kppip.go.id
Kementerian Perindustrian RI, “Kawasan Industri di Gresik Berpotensi Serap Investasi Rp 83,2 Triliun,†Https://Kemenperin.Go.Id/. 2018.
A. Pamidimukkala and S. Kermanshachi, “Impact of Covid-19 on field and office workforce in construction industry,†Proj. Leadersh. Soc., vol. 2, p. 100018, 2021, doi: 10.1016/j.plas.2021.100018.
S. Susanto, D. A. Karisma, and K. C. Budi, “Faktor yang Berhubungan dengan Pengetahuan Penerapan Keselamatan Kerja pada Pekerja Konstruksi,†J. Civilla, vol. 5, no. 2, pp. 476–485, 2020, [Online]. Available: http://www.jurnalteknik.unisla.ac.id/index.php/CVL/article/view/494
S. Supriyanto, “MANAJEMEN PENGEMBANGAN KURIKULUM DAN KEMITRAAN LEMBAGA KURSUS DAN PELATIHAN DENGAN DUNIA USAHA DAN INDUSTRI DALAM PENJAMINAN MUTU DI LKP A-EMCE MAJALENGKA.†Pascasarjana Institute Agama Islam (IAIN) Syekh Nurjati, Cirebon, 2018. [Online]. Available: https://doi.org/10.1016/j.gecco.2019.e00539%0Ahttps://doi.org/10.1016/j.foreco.2018.06.029%0Ahttp://www.cpsg.org/sites/cbsg.org/files/documents/Sunda Pangolin National Conservation Strategy and Action Plan %28LoRes%29.pdf%0Ahttps://doi.org/10.1016/j.forec
V. Simandalahi, TINJAUAN YURIDIS TERHADAP PERSEKONGKOLAN TENDER PAKET PEKERJAAN PEMBANGUNAN RUMAH SAKIT RUJUKAN REGIONAL LANGSA PROVINSI ACEH DALAM HUKUM PERSAINGAN USAHA (STUDI PUTUSAN NO. 04/KPPU-L/2020). SKRIPSI FAKULTAS HUKUM UNIVERSITAS SUMATRA UTARA, 2021.
Chalifsky, Handbook of Human Resource Development. United States: Wil, 2014.
Inkindo, “Pedoman Standar Minimal Pedoman Standar Minimal, Remunerasi/Biaya Personil (Billing Rate) dan Biaya Langsung (Direct Cost) untuk Badan Usaha Jasa Konsultansi.†2021.
Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: ALFABETA, 2010.
Sutrisno, Manajemen Sumber Daya Manusia. Jakarta: Kencana, 2009.
M. K. R. Indonesia, Penetapan Standar Kompetensi Nasional Indonesia Kategori jasa Profesional, Ilmiah dan Teknis Golongan Pokok Jasa Arsitektur dan Teknik Sipil, Analisis dan Uji Teknis Bidang Keahlian Manajemen Konstruksi. Menteri Ketenagakerjaan Republik Indonesia, 2015.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
