Simulasi Kopling Magnetik Transfer Energi Nirkabel (Wireless Power Transfer)
DOI:
https://doi.org/10.30736/je.v5i1.424Keywords:
Magnetic coupling, wireless energy transfer, multisimAbstract
One method  for energy transfer wireless is magnetic induction couplings. In general, copper is the most important element in producing magnetic flux in the form of coils or coils. Copper is used as an electrical transfer media because the material consists of many electrons that can move freely. Magnetic coupling simulation with Multisim 12.00 shows that the transmitter coil induces a receiver coil and energy transfer occurs.Downloads
References
Supriyadi*, Edi Rakhman, Suyanto, Arif Rahman, & Noor Cholis Basjaruddin, 2017. Transfer Daya Nirkabel dengan Kopling Induksi, Jurnal Teknoka : Politeknik Bandung
M Fareq, M Fitra, M Irwanto, Syafruddin Hasan,M Arinal.2014. Low wireless power transfer using Inductive Coupling for mobile phone charger . School of Electrical System Engineering Universiti Malaysia Perlis
A. Kumar, â€WiTricity : Wireless Power Transfer By Non-radiative Method,†International Journal of Engineering Trends and Technology (IJETT), 2014.
E. Wong, â€A Review on Technologies for Wireless Electricity,†Hongkong, 2013.
S. F. Bush, Smart Grid: Communication-Enabled Intelligence for the Electric Power Grid, Wiley, 2014.
A. Gopinath, â€All About Transferring Power Wirelessly,†Electronics For You E-zine (EFY Enterprises Pvt. Ltd.), pp. 52-56, 16 January 2015.
Saputro, Agus Heru.2018. Desain WPE dengan Koil / Toroid dan Selenoid Menggunaan Teknik Resonansi Induksi Elektromagnetik
Roncback Oscar, 2013. Optimalized of Wireless Power System. Master Thesis, Luka University of Technology Sweden
Zhen Ning Low, “Design and Test of a High Power High Efficiency Loosely Coupled Planar Wireless Power Transfer System†IEEE transactions on industrial electronics, vol. 56, no. 5, May 2009.
K. Oguri, “Power supply coupler for battery chargerâ€, US patent 6 356049, 2000.
Y. Yang and M. Jovanavic, “Contactless electrical energy transmission systemâ€,US Patent 6 301 128, 2000.
H. J. Brockmann and H. Turtiainen, “Charger with inductive power transmission for batteries in a mobile electrical deviceâ€, US Patent 6 118249, 1999
E. Sazonov och M. R.Neuman, Wearable Sensors: Fundamentals, Implementation and Applications, Elsevier, 2014.
S. Davis, â€Wireless power inimizes interconnection problems,†Power Electronics Technology (Penton Electronics Group), pp. 10- 14, 2011.
R.Puers, Omnidirectional Inductive Powering for Biomedical Implants, Springer Science & Business Media, 2008.
D. C. Giancoli, Physics: Principles with Applications (Fifth ed.), New Jersey, United States: Pearson/Prentice Hall, 1998.
T. V.Wilson, â€How Wireless Power Works,†1 Juni 2014. [Online]. [Diunduh 11 Juni 2017].
S. S.Valtchee, E. N. Baikova och L. R.Jorge, â€Electromagnetic Field as the Wireless Transporter of Energy,†Facta Universitatis Ser. Electrical Engineering, vol. 25, nr 3, pp. 171-181, 2012.
I. Darmawan, â€Pengembangan Inverter 12 VDC ke 220 VAC 50Hz dengan Penguat Akhir H-Bridge Mosfet,†Universitas Indonesia Departemen Teknik Elektro, Depok, 2012.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
