Rancang Bangun Sistem Keamanan Sepeda Motor Dengan Fingerprint Berbasis Telephone
DOI:
https://doi.org/10.30736/je.v3i2.251Keywords:
motorcycle security system, fingerprint, Arduino, Sim 900 Module, ATMega 328PAbstract
This research uses fingerprint as the security system. This tool checks if there is a match between the data obtained from the verification process and data stored on the file, if it matches then the motorcycle engine will light up. If there is stranger tries to put his finger into the fingerprint tool installed in the motorcycle, it will be rejected and the GSM SIM 900 module will inform the owner via phone that the motorcycle is in unsafe conditionDownloads
References
Adinadra Sisdarmanto, Ainun Pangestu Wisnu dan Sahroni Alvin,2015, Kendali Robot Pemonitor Jarak Jauh Berbasis Smartphone Android Implementasi Sistem Dan Analisis Kualitas Video Streaming, Universitas Islam Indonesia
Amin, Md. Syedul & Jalil, Jubayer. 2012. Accident Detection and Reporting System using GPS, GPRS and GSM Technology. IEEE/OSA/IAPR International Conference
Bejo, Agus, C dan AVR Rahasia Kemudahan Bahasa C dalam Mikrokontroler ATMEGA 8535, Graha Ilmu, Yogyakarta, 2008.
Dian Purbani Juli. 2010, Merancang Alat Mesin Identifikasi Sidik Jari Sebagai Kunci Pengaman Pintu. Universitas Sebelas Maret Surakarta
Febrianto Andrian R. 2017, Sistem Pengaman Sepeda Motor Menggunakan Sms Gateway dan Gps, Politektik Negeri Batam
http:/www.dfrobot.com/index.php?route=product/product&product_id=1121#.vw2zm-YbKZQ
http://gudang-faisal.blogspot.co.id/2016/04/df-player.html,2016
https://moal-aya.blogspot.co.id/2014/08/pengertian-dan-fungsi-batrai akiaccu.html, 2018
http://belajar-mikrokontroler-2016.blogspot.co.id/2017/02/tutorial-df-player.html
Lesmana, Hendra Dony. 2013.Rancang Bangun Sistem Monitoring Kecepatan Kendaraan Berbasis GPS dengan SMS Sebagai Media Pengiriman Data. Skripsi. Universitas Brawijaya.
Malik, Abdul. 2017. SIM900A GSM GPRS mini modul. https://www.indoware.
com/produk-1873-sim900-a-sim900a-gsm-gprs-mini-modul.html
Muis, Saludin, Global positioning system: sebuah pengantar untuk metode, sistem dan perancangan, Graha Ilmu, Yogyakarta, 2012.
Oroh Joyner R.. 2014, Rancang Bangun system Keamanan motor dengan pengenalan sidik jari. Universitas Sumantra Barat
Pangestu Agung, Sumardi, dan Sudjadi, 2014, perancangan alat pengaman dan tracking kendaraan sepeda motor dengan menggunakan mikrokontroler atmega644pa, Universitas Diponegoro Semarang
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
