Study of the Role of Construction Companies on the K3 Management System as an Effort to Improve the Quality of the Company

Nurjanah; Hangga Prima Setiawan; Bambang Hardadi; Iqbal Novarino

doi:10.30736/cvl.v9i2.1168

Authors

Nurjanah Universitas Islam Balitar
Hangga Prima Setiawan universitas islam Balitar
Bambang Hardadi Universitas islam Balitar
Iqbal Novarino Universitas islam Balitar

DOI:

https://doi.org/10.30736/cvl.v9i2.1168

Keywords:

OHSAS, Employers, Workers

Abstract

Measurement of construction companies can be declared good if implementing the Occupational Health and Safety Management System (OHSAS). Meanwhile, the most important element in the OHSAS implementation program is the company's policy on designing the construction work safety system or support from the Board of Directors for the implementing occupational safety design. This study aims to check the influence of the company's owner on the OHSA quality of the company. The survey was followed by distributing questionnaires to several construction company owners in Blitar for data collection. It was taken to determine whether this research is very influential or not at all regarding the importance of the company's owner's role regarding OHSA and the application of protective equipment to reduce work accidents on the quality and competitiveness of the company in the construction project auction in the construction project for private, local, and national governments. The results of the study showed superiors and directors of construction service companies whose roles and responsibilities have not been maximized in implementing the company’s occupational health and safety management system in Blitar. In this case, the implementation of OHSA by the company indirectly contributes to maintaining the quality of the services provided.

Downloads

Download data is not yet available.

References

Admin, 2023. [Online]. Available: https//www.blitarkab.go.id.

Endroyo, “Keselamatan dan Kontruksi Konsepsi dan Regulasi,” Jurnal Teknik Sipil dan Perencanaan, pp. 168-180, 2009.

Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D, Bandung: CV Alfabeta, 2017.

N. Sa’diyah dan T. N. Aeny, “Keragaman dan heritabilitas ketahanan tebu populasi F1 terhadap penyakit bercak kuning di PT. Gunung Madu Plantations Lampung,” Jurnal Hama dan Penyakit Tumbuhan Tropika, vol. 12, no. 1, pp. 71-77, 2012.

A. Vibhute dan S. K. Bodhe, “Applications of image processing in agriculture: A survey,” International Journal of Computer Applications, vol. 52, no. 2, pp. 34-40, 2012.

A. N. Rathod, B. Tanawal dan V. Shah, “Image processing techniques for detection of leaf disease,” International Journal of Advanced Research in Computer Science and Software Engineering, vol. 3, no. 11, pp. 397-399, 2013.

R. K. Sungkur, S. Baichoo dan A. Poligadu, “An automated system to recognise fungi-caused diseases on sugarcane leaves,” dalam Proceedings of Global Engineering, Science and Technology Conference, Bencoolen, Singapura, 2013.

A. Asfarian, Y. Herdiyeni, A. Rauf dan K. H. Mutaqin, “Paddy diseases identification with texture analysis using fractal descriptors based on fourier spectrum,” dalam Computer, Control, Informatics and Its Applications (IC3INA), 2013 International Conference on, Jakarta, 2013.

K.-Y. Huang, “Application of artificial neural network for detecting Phalaenopsis seedling diseases using color and texture features,” Computers and Electronics in Agriculture, vol. 57, no. 1, p. 3–11, 2007.

D. A. Bashish, M. Braik dan S. B. Ahmad, “A framework for detection and classification of plant leaf and stem diseases,” dalam Signal and Image Processing (ICSIP), 2010 International Conference on, Chennai, 2010.

A. Meunkaewjinda, P. Kumsawat, K. Attakitmongcol dan A. Srikaew, “Grape leaf disease detection from color imagery using hybrid intelligent system,” dalam Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, 2008. ECTI-CON 2008. 5th International Conference on, Krabi, 2008.

P. Chaudhary, A. K. Chaudhari, A. N. Cheeran dan S. Godara, “Color transform based approach for disease spot detection on plant leaf,” International Journal of Computer Science and Telecommunications, vol. 3, no. 6, pp. 65-70, 2012.

F. Mendoza, P. Dejmek dan J. M. Aguilera, “Calibrated color measurements of agricultural foods using image analysis,” Postharvest Biology and Technology, vol. 41, no. 3, p. 285–295, 2006.

A. Kadir, L. E. Nugroho, A. Susanto dan P. I. Santosa, “Leaf classification using shape, color, and texture features,” International Journal of Computer Trends and Technology, pp. 225-230, 2013.

P. Rott, A guide to sugarcane diseases, Paris: Quae, 2000.

L. Busin, N. Vandenbroucke dan L. Macaire, “Color spaces and image segmentation,” Advances in Imaging and Electron Physics, vol. 151, pp. 65-168, 2008.

N. Otsu, “A threshold selection method from gray-level histograms,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 9, no. 1, pp. 62-66, 1979.

A. P. Kusuma dan Darmanto, “Pengenalan angka pada sistem operasi android dengan menggunakan metode template matching,” Register: Jurnal Ilmiah Teknologi Sistem Informasi, vol. 2, no. 2, pp. 68-78, 2016.

R. M. Haralick, K. Shanmugam dan I. Dinstein, “Textural features for image classification,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 3, no. 6, pp. 610-621, 1973.

T. Cover dan P. Hart, “Nearest neighbor pattern classification,” IEEE Transactions on Information Theory, vol. 13, no. 1, pp. 21-27, 1967.

E. K. Ratnasari, R. V. H. Ginardi dan C. Fatichah, “Pengenalan penyakit noda pada citra daun tebu berdasarkan ciri tekstur fractal dimension co-occurrence matrix dan L*a*b* color moments,” JUTI, vol. 12, no. 2, p. 27– 36, 2014.

Saragi, “Tentang Keselamatan dan Kesehatan Kerja,” Jurnal teknik SIpil, 2021.

D. T. K. R. 19770, “Undang-undnag No 1,” dalam Tentang Keselamatn Kerja, Jakarta, 1970.

D. T. K. RI, “Undang-undang No 1 tahun 1970 Tentang Keselamatan Kerja,” dalam Undang-undang No 1 tahun 1970, 1970.

Tenriajeng, “Aalisis Manajemen Resiko Keselamatan dan Kesehatan Kerja Lingkungan Mutu Proyek Jalan Toldan Jembatan Pada PT. Hutama Karya insfrastruktur di Kota Depok,” Jurnal Teknik Sipil dan Lingkungan Universitas Nusa Petra, 2020.

Bobbu, “Keselamatan dan Kesehatan Kerja pada Pelaksanaan Proyek Kontruksi,” Jurnal Sipil Statik, 2021.

M. Ria, “Evaluasi Penyediaan Sistem Manajemen Keselamatan dan Kesehatan Kerja (K3) pada Perusahaan jasa Kontruksi,” Majalah Teknik Sipil, 2018.

Lastri, “Tanggung Jawab Pengusaha dan Pekerja dalam Penerapan K3 pada Proyek Konstruksi,” Dharmasisya, 2021.

Wirawan, Evaluasi Kinerja Sumber Daya Manusia, Jakarta: Salemba Empat, 2009.

W. P. Nadiasa, “Manajemen Resiko Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Pembangunan Ciputra WorldJ akarta,” Jurnalspektran, 2015.

Ervianto, Manajemen Proyek Konstruksi Edisi Revisi, Yogyakarta: Andi, 2005.

H. M. Willar, “Pemodelan sistem Manajemen Mutu Perusahaan Penyedia Jasa Kontruksi ( Kontraktor) Skala Kecil dikota Manado,” Jurnal Ilmiah Media Engineering, pp. 508-518, 2016.

Wiryodiningrat, ISO 9000 untuk Kontraktor, Jakarta: PT Gramedia Pustaka Utama, 1997.

Masjuli, Sistem Manajemen Keselamatan dan Kesehatan Kerja Berbasis SNI ISO 45001, Badan Standarisasi Nasionan, 2018.

H. Soewarso, Total Quality Manajement, Yogyakarta: Andi, 2004.

B. M. Malingkas, “KESELAMATAN DAN KESEHATAN KERJA PADA PELAKSANAAN,” Jurnal Sipil Statik, pp. 430-433, 2013.

N. S. Fajar, “ANALISIS PENGARUH KESEHATAN DAN KESELAMATAN KERJA (K3) TERHADAP KINERJA PEKERJA KONSTRUKSI PADA PROYEK PEMBANGUNAN FLY OVER PALUR,” e-Jurnal MATRIKS TEKNIK SIPIL, 2016.

SinagaSaragi, “KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PROYEK PEMBANGUNAN RUMAH SUSUN LANJUTAN PROYEK SUMATERA UTARA MEDAN,” CONSTRUK : Jurnal Teknik Sipil, pp. 41-48, 2021.

P. K. Suma’mur, Higine Perusahaan dan Keselamatan Kerja, Jakarta: CV Haji Mas Agung, 1992.