Analysis of Potential Hazards and Risks of Work Accidents by Using the HIRARC Method On Earthwork and Geosynthetics
DOI:
https://doi.org/10.30736/cvl.v10i1.1350Keywords:
Potential Hazards and Riks, Work accident, HIRARC, Occupational health and safety (K3)Abstract
The world of construction always has potential hazards and risks that always endanger the safety and health of workers. The occurrence of work accidents is an event that is always unexpected and can cause losses, both for the construction company and the workers. This study aims to determine the potential hazards in an effort to reduce work accidents in the Banjarsari- Dukuh Tengah road improvement project in Sidoarjo Regency. The method used in this research is hazard identification risk assessment and risk control (HIRARC). The results showed that in the construction of the Banjarsari- Dukuh Tengah road improvement project in Sidoarjo Regency, especially in earthworks and geosynthetics, there were 10 jobs in the Banjarsari- Dukuh Tengah road improvement project in Sidoarjo Regency showing that the potential hazards were 2 activities classified as having a "low risk," 3 activities with a "medium risk," and 5 other activities with a "high" risk. To overcome these problems, suggestions for improvement are given so that workers carry out work activities in accordance with standard operating procedures (SOPs) and wear personal protective equipment (PPE).
Downloads
References
Yusmaini, E. P. Rahayu, dan A. Alamsyah, “Risk Analysis of Occupational Safety and Health Using the HIRARC Method on Nurses at the Inpatient Installation of,” vol. 10, no. November 2023, hal. 77–85, 2024.
A. R. Mubarroq, T. Yulianto, M. W. Nugroho, dan T. Sundari, “IDENTIFIKASI BAHAYA KESELAMATAN KESEHATAN KERJA ( K3 ) ( Studi Kasus : Pekerjaan Rehabilitasi / Pemeliharaan Berkala Ruas Jalan Tampingmojo-Tambak Beras ),” vol. 04, no. 02, hal. 123–130, 2024.
R. Amalia, D. Herwanto, dan W. Rana Zahra, “Analisis Potensi Bahaya Dan Risiko Kecelakaan Kerja Dengan Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (Hirarc) Pada Pemotongan Kayu,” Ind. Inov. J. Tek. Ind., vol. 13, no. 1, hal. 13–19, 2023, doi: 10.36040/industri.v13i1.4523.
D. Riskawati; adiasa, Iksan; Rahman, “ANALISIS POTENSI BAHAYA UNTUK MEMINIMALISIR RISIKO KECELAKAAN KERJA PADA PROYEK PEMBANGUNAN JETTY PLTMGU LOMBOK PEAKER DI PT. XYZ MENGGUNAKAN METODE HIRARC,” vol. 6, no. 1, 2025.
H. Mauliyani, N. Romdhona, A. Andriyani, dan M. Fauziah, “Identifikasi Risiko Keselamatan Kerja Metode (Hirarc) Pada Tahap Pembuatan Tangki Di Pt. Gemala Saranaupaya,” Environ. Occup. Heal. Saf. J., vol. 2, no. 2, hal. 163, 2022, doi: 10.24853/eohjs.2.2.163-174.
J. A. Bagus, Alfin Rizki; Saifuddin, “Analisis dan usulan perbaikan risiko kecelakaan kerja dengan metode HIRARC ( Hazard Identification Risk Assesment And Risk Control ) di PT Putra Jawamas,” vol. 8, no. 1, hal. 249–256, 2025.
M. O. Bustamin, W. A. Nugroho, dan U. U. Kuroumang, “Analisis Risiko Kecelakaan Kerja pada Proyek Apartemen Klaska Residence Surabaya,” Publ. Ris. Orientasi Tek. Sipil, vol. 4, no. 2, hal. 82–89, 2022, doi: 10.26740/proteksi.v4n2.p82-89.
S. Umam, Khotibul; Suseno, “Analisis K3 Pada Pekerja Bagian Proses Fabrikasi Plate Tangki dengan,” 2025.
B. F. Aprilla dan D. Yulhendra, “Penerapan Metode HIRARC dalam Menganalisis Risiko Bahaya dan Upaya Pengendalian Kecelakaan Kerja di Area Crusher dan Belt Conveyor PT. Semen Padang,” J. Bina Tambang, vol. 8, no. 1, hal. 203–212, 2023.
Estri Kartika, Endang Purnawati Rahayu, Kamali Zaman, Herniwanti, dan Nopriadi, “Analisis Manajemen Risiko dengan Metode AS/NZS 4360:2004 pada Tangki Timbun Minyak di Riau,” Afiasi J. Kesehat. Masy., vol. 7, no. 1, hal. 218–226, 2022, doi: 10.31943/afiasi.v7i1.193.
D. H. M. Mantiri, G. Y. Malingkas, dan R. J. M. Mandagi, “Analisis pengelompokan dan pengendalian risiko kecelakaan kerja berdasarkan aturan SMK3 menggunakan metode ranking pada proyek pembangunan instalasi rawat inap RSUD Maria Walanda Maramis Minahasa Utara,” J. Ilm. Media Eng., vol. 10, no. 2, hal. 105–116, 2020, [Daring]. Tersedia pada: https://ejournal.unsrat.ac.id/index.php/jime/article/view/31236
V. Monoarfa dan R. N. B. Miolo, “Penerapan Keselamatan dan Kesehatan Kerja ( K3 ) Menggunakan Metode HIRARC Pada UMKM Pabrik Tahu,” J. Pengabdi. Ekon., vol. 02, no. 01, hal. 1–6, 2022.
T. Santoso, N. Budiharti, S. Haryanto, ) Program, dan S. T. Industri, “Upaya Pengendalian Resiko Kecelakaan Kerja Dengan Metode Job Safety Analysis Pada Pekerjaan Pembuatan Produk Tahu Di Desa Ploso , Kab. Jombang, Jawa Timur,” J. Mhs. Tek. Ind., vol. 4, no. 2, hal. 238–247, 2021.
E. W. Abryandoko, “Dengan Menggunakan Metode Hirarc Dan Safety,” J. Rekayasa Sipil, vol. 12, no. 1, hal. 50–57, 2018.
M. Kurnianingtias, “Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) dengan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) di Workshop Garmen Kampus Tekstil,” J. Tekst. J. Keilmuan dan Apl. Bid. Tekst. dan Manaj. Ind., vol. 5, no. 2, hal. 77–87, 2022, doi: 10.59432/jute.v5i2.37.
M. F. Pratama, E. Ismiyah, dan A. W. Rizqi, “Analisis Risiko (K3) Metode Hazard Identification Risk Assesment And Risk Control (HIRARC) di Departemen Laboratorium PT. ABC,” J. Ilm. Giga, vol. 25, no. 2, hal. 88, 2022, doi: 10.47313/jig.v25i2.1922.
D. O. Santoso, M. D. Kurniawan, dan H. Hidayat, “Analisa Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC di PT. INHUTANI 1 UMI GRESIKHUTANI 1 UMI GRESIK,” J. Media Tek. dan Sist. Ind., vol. 6, no. 1, hal. 12, 2022, doi: 10.35194/jmtsi.v6i1.1580.
R. S. Mulyani R.Y, Kusnadi, “Analisis Risiko K3 Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) Pada Pekerja di PT XYZ Yoane,” J. Ilm. Wahana Pendidik., vol. 8 No.3, no. 3, 2021, doi: 10.5281/zenodo.6301688.
S. R. Tri Handari dan M. S. Qolbi, “Faktor-Faktor Kejadian Kecelakaan Kerja pada Pekerja Ketinggian di PT. X Tahun 2019,” J. Kedokt. dan Kesehat., vol. 17, no. 1, hal. 90, 2021, doi: 10.24853/jkk.17.1.90-98.
D. N. Putri dan F. Lestari, “Analisis penyebab kecelakaan kerja pada pekerja di proyek konstruksi : Literatur review,” J. Kesehat. Masy., vol. 7, no. 1, hal. 451–452, 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Sekar Ayu Kuncaravita, Rizki Astri Apriliani, Muhammad Lawdy D.V, Dayat Indri Y
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
