The Effectiveness of the Water Additional Ingredient Urea CO(NH2)2 to the Concrete Fc' 20 MPA on Curing Process
DOI:
https://doi.org/10.30736/cvl.v7i2.892Abstract
Concrete quality depends on the value of the ratio of materials, how to blend and how to pour the concrete mixture, how to compact and how to care for it during the hardening process. This study aims to determine how much influence the curing process using water with a mixture of Co(NH2)2 and normal water has on the compressive strength of concrete fc' 20 Mpa. The sample is a cylindrical specimen with a diameter of 15 cm and a height of 30 cm. Samples were made 3 test objects with the age of 28 days and tested coherently. The compressive strength of normal concrete has increased in quality with the age between 7 is 9.1 Mpa to 28 days is 17 Mpa. While the concrete with curring process using water with a mixture of urea increased at age 7 with a value of 10.8 Mpa to 21 days with a value of 14.4 Mpa, but at age 28 the strength of the concrete decreased by 12 Mpa. Cracks with cone and split types are 10 pieces, this can happen because the material in the concrete mixer has not been mixed well during the concrete manufacturing process.Downloads
References
ASTM C 191-92, “Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needleâ€
ASTM C 188-95, “Standard Test Method for Density of Hydraulic Cement,†2003
ASTM C 33-78, “STANDARD SPECIFICATION FOR CONCRETE AGGREGATESâ€
ASTM C 128-78, “Standard Test Method for Density, Relative Density (Specific Gravity)â€
ASTM C 128-93, “Specific gravity and Absorption of Fine Aggregateâ€
National Standardization Agency (2011) 'SNI 2493-2011: Procedures for Manufacturing and Maintenance of Concrete Test Objects in the Laboratory', Indonesian National Standard Agency , p. 23. Available at: www.bsn.go.id .
National Standardization Agency (2011) 'SNI 1974-2011 Method of Testing Compressive Strength of Concrete with Cylindrical Test Objects', Indonesian National Standardization Agency , p. 20.
National Standardization Agency (2002) 'Procedures for evaluating concrete strength test results SNI 03-6815-2002', p. 32. Available at: http://sispk.bsn.go.id/SNI/DetailSNI/179.
Nurtanto, D., Rahayu, A. A. and Wahyuningtyas, W. T. (2021) ‘Pengaruh Perawatan Air Laut dan Air Tawar terhadap Kuat Tekan Beton Geopolymer yang Memadat Sendiri’, Rekayasa, 14(1), pp. 32–38. doi: 10.21107/rekayasa.v14i1.8375.
Risamawarni, R., Bachtiar, E. and Rachim, F. (2020) ‘Pengaruh Subtitusi Limbah Beton Sebagai Agregat Kasar Terhadap Kuat Tekan Beton Curing Air Laut’, Indonesian Journal of Fundamental Sciences, 6(2), pp. 127–137. Available at: https://ojs.unm.ac.id/pinisi/article/view/17464.
Saputra, RD and Hepiyanto, R. (2017) 'EFFECT OF PDAM, SEA, COMBBERAN WATER ON THE CURING PROCESS ON THE COMPRESSION STRENGTH OF CONCRETE Fc 14.53 Mpa', CIVILA Journal , 2(2), p. 6. doi : 10.30736/cvl.v2i2.78.
SNI 1973-2008 (2008) 'How to test the weight of contents, volume of mixture production and content ', Indonesian National Standard Agency , (1), p. 6684.
SNI 2458 (2008) 'Regarding Procedures for Sampling of Fresh Concrete Test', National Standardization Agency . Available at: http://sispk.bsn.go.id/SNI/DetailSNI/7549.
SNI 4810 (2013) 'Procedures for the manufacture and maintenance of concrete test specimens in the field', Indonesian National Standard . Available at: www.bsn.go.id.
SNI-1972 (2008) 'Concrete Slump Test Method'.
SNI 03 -2834-2000, “Regarding Procedures for Making Normal Concrete Mixture Plans,†2000
SNI 03-1974-1990, "Method of testing the compressive strength of concrete," 1990
Sutandar, E. (2013) ‘Pengaruh Pemeliharaan (Curing) Pada Kuat Tekan Beton Normal’, Vokasi, IX(2), pp. 89–99.
Syamsuddin, R., Wicaksono, A. and M, F. F. (2011) ‘Pengaruh Air Laut Pada Perawatan (Curing) Beton Terhadap Kuat Tekan Dan Absorpsi Beton Dengan Variasi Faktor Air Semen Dan Durasi Perawatan’, Jurnal Rekayasa Sipil, 5(2), pp. 68–75.
Tedc, D. P. and Masitoh, S. (2020) ‘Kajian Sifat Mekanis Beton Dari Limbah Batu Kerajinan Dikaitkan Dengan Metode Perawatan ( Curing )’, 14(2), pp. 195–200.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
