Wear Rate By Utilizing Asphalt Starbit PG 70 Due To Peat Water Soat
DOI:
https://doi.org/10.30736/cvl.v8i1.1053Keywords:
Asphalt Starbit, Peat Water, Wear Characteristics, Bitumen.Abstract
Asphalt Starbit PG 70 is a polymer (elastomer) based modified asphalt. The advantages of Asphalt Starbit PG 70 are resistant to water and weather, thus affecting the construction of highway infrastructure. Construction of highways in peat water areas, where the characteristics of peat water are that it contains high levels of organic matter and iron and has a low pH < 4 – 5, causing performance disturbances and causing pavement damage. The study aimed to analyze the wear value of Starbit asphalt due to peat water immersion for 30 minutes, 24 hours, and 48 hours. The research method is wear testing based on the 2018 Revision 2 Bina Marga Specifications. The results of soaking in peat water for 48 hours experienced an increase in weight loss of 7.37% due to having a high level of acidity which contains lignin compounds in organic matter. Meets the specifications of Highways 2018 Revision 2, namely for a weight loss value of ≤ 20%.
Downloads
References
A. Efendy and E. Ahyudanari, “Analisis Perbandingan Kadar Aspal Optimum ( KAO ) untuk Perbedaan Gradasi (BBA, FAA, dan BM),†J. Apl. Tek. Sipil, vol. 17, no. 1, pp. 7–12, 2019.
M. Fauziah and A. Handaka, “Pemanfaatan Aspal Starbit E-55 Untuk Menahan Penurunan Kinerja Akibat Rendaman Air Hujan Pada Campuran Split Mastic Asphalt,†J. Transp., vol. 17, no. 1, pp. 11–20, 2017.
R. Yulismawati, M. Olivia, and E. Saputra, “Durabilitas Beton Sekat Kanal Terpapar Air Gambut dan Air Laut,†J. Tek., vol. 15, no. 2, pp. 137–147, 2021.
Winayati, H. Rahmat, and A. Saleh, “Analisis Penggunaan Abu Tandan Kelapa Sawit Sebagai Filler Ditinjau Dari Nilai Keausan Perkerasan ( Cantabro Test ),†Pros. Konf. Nas. Tek. Sipil dan Perenc. (KN-TSP)2017, pp. 1–10, 2018.
A. R. Harahap, “Pengaruh Proses Penuaan Akibat Rendaman Air Gambut Terhadap Durabilitas Campuran AC-WC Berdasarkan Uji Cantabro,†2020.
M. R. F. Putra, A. Malik, and Y. Alwinda, “Pengaruh Air Gambut Terhadap Karakteristik Marshall Pada Campuran Ac-Wc Yang Menggunakan Abu Tandan Sawit Sebagai Filler,†Jom FTEKNIK, vol. 8, pp. 1–12, 2021.
B. A. Rahmahima, I. A. Candra, and Y. C. S. Poernomo, “Penggunaan Biji Jenitri Sebagai Pengganti Filler Pada Lapisan Aspal (AC - BC) Terhadap Variasi Suhu,†J. Manaj. Teknol. dan Tek. Sipil, vol. 3, no. 2, pp. 41–48, 2020.
Asrol, S. M. Saleh, and M. Isya, “Karakteristik Campuran Aspal Beton Ac-Wc Dengan Substitusi Buton Rock Asphalt Terhadap Rendaman Air Berlumpur,†J. Arsip Rekayasa Sipil dan Perenc., vol. 1, no. 3, pp. 39–45, 2018.
Subarkah and W. Romadhona, “Pengaruh Tipe Gradasi Agregat Terhadap Sifat Beton Aspal Dengan Bahan Pengikat Aspal Pertamina Pen 60/70 dan Aspal Starbit E-55 Campuran AC-WC,†TEKNISIA, vol. XX, no. 1, pp. 78–84, 2015.
Y. Yunsi and Z. H. Ramadan, “Pengembangan Komik Mitigasi Bencana Alam Di Pekanbaru Untuk Siswa Kelas V SDN 21 Pekanbaru,†JGK (Jurnal Guru Kita), vol. 6, no. 2, pp. 117–127, 2022.
C. N. Indriani, M. Purwandito, and W. Alamsyah, “Pemanfaatan Ban Bekas Sebagai Bahan Tambah Campuran Aspal Pada Perkerasan Jalan AC - WC Tehadap Nilai Marshall,†Bisnis, Sos. dan Teknol., vol. 12, no. 1, pp. 29–36, 2022.
S. Haniza, U. Jusi, and M. Rizki, “Analisis Nilai Karakteristik Asphalt Concrete-Wearing Course Terhadap Variasi Lama Rendaman Pada Air Gambut,†Sainstek (e-Journal), vol. 10, no. 2, pp. 186–191, 2022.
Y. S. B. Tondang, Ismeddiyanto, and E. Saputra, “Kajian Sifat Mekanik Beton Cor di Dalam Air Gambut (Underwater Concrete),†Sainstek (e-Journal), vol. 9, no. 2, pp. 77–86, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Muthia Anggraini, Krisela Br Simbolon, Alfian Saleh
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
