Study on the Ductility Behavior of Reinforced Concrete Columns with 10 mm Shear Reinforcement Diameter under Variable Axial Loads
DOI:
https://doi.org/10.30736/cvl.v10i1.1410Keywords:
Reinforced Concrete, Shear Reinforcement, Ductility, Axial Load, Structural PerformanceAbstract
Understanding the ductility behavior of reinforced concrete columns is critical for ensuring structural safety in seismic regions, yet there remains limited research on the specific effects of shear reinforcement diameter under varying axial loads. This research investigates the ductility behavior of reinforced concrete columns with a 10 mm shear reinforcement diameter under varying axial loads of 1000 kN, 2500 kN, and 5000 kN. The study aims to understand the effect of shear reinforcement on the ductility of columns and how varying axial loads influence their performance. Numerical modeling was performed using Xtract software, with columns designed to have dimensions of 600 mm x 600 mm (unconfined) and 450 mm x 450 mm (confined). The study focuses on key parameters such as curvature at initial load, curvature at first yield, ultimate curvature, and moment-curvature relationships. The results show that as the axial load increases, the curvature ductility decreases, with the column under 1000 kN demonstrating the highest ductility and the column under 5000 kN showing the lowest. The findings highlight the significant role of shear reinforcement in enhancing the ductility of columns, suggesting that optimal reinforcement design is crucial for ensuring structural resilience under variable loading conditions.
Downloads
References
P. P. A. Huy, T. Y. Yuen, C. C. Hung, and K. M. Mosalam, "Seismic behaviour of full-scale lightly reinforced concrete columns under high axial loads," Journal of Building Engineering, vol. 56, p. 104817, 2022.
A. C. Barrera, J. L. Bonet, M. L. Romero, and M. A. Fernández, "Ductility of slender reinforced concrete columns under monotonic flexure and constant axial load," Engineering Structures, vol. 40, pp. 398-412, 2012.
Y. C. Ou and D. P. Kurniawan, "Shear behavior of reinforced concrete columns with high-strength steel and concrete," ACI Structural Journal, vol. 112, no. 1, pp. 35-45, 2015.
R. Eid, K. Kovler, I. David, W. Khoury, and S. Miller, "Behavior and design of high-strength circular reinforced concrete columns subjected to axial compression," Engineering Structures, vol. 173, pp. 472-480, 2018.
L. Jin, S. Zhang, D. Li, H. Xu, X. Du, and Z. Li, "A combined experimental and numerical analysis on the seismic behavior of short reinforced concrete columns with different structural sizes and axial compression ratios," International Journal of Damage Mechanics, vol. 27, no. 9, pp. 1416-1447, 2018.
T. Dirikgil, "Experimental investigation of the effects of concrete strength and axial load ratio on the performances of CFRP-wrapped and externally collared RC short columns," Engineering Structures, vol. 230, p. 111647, 2021.
M. M. El-Attar, H. Z. El-Karmoty, and A. A. EL-Moneim, "The behavior of ultra-high-strength reinforced concrete columns under axial and cyclic lateral loads," HBRC Journal, vol. 12, no. 3, pp. 284-295, 2016.
H. Qi, L. Guo, J. Liu, D. Gan, and S. Zhang, "Axial load behavior and strength of tubed steel reinforced-concrete (SRC) stub columns," Thin-Walled Structures, vol. 49, no. 9, pp. 1141-1150, 2011.
S. D. Adhikary, B. Li, and K. Fujikake, "Strength and behavior in shear of reinforced concrete deep beams under dynamic loading conditions," Nuclear Engineering and Design, vol. 259, pp. 14-28, 2013.
D. Sokoli and W. M. Ghannoum, "High-strength reinforcement in columns under high shear stresses," ACI Structural Journal, vol. 113, no. 3, p. 605, 2016.
X. Cheng, C. Lu, X. Ji, Y. Li, and Y. Song, "Seismic behavior of reinforced concrete slender walls subjected to variable axial loads," Soil Dynamics and Earthquake Engineering, vol. 175, p. 108253, 2023.
K. M. Quang, V. P. Dang, S. W. Han, M. Shin, and K. Lee, "Behavior of high-performance fiber-reinforced cement composite columns subjected to horizontal biaxial and axial loads," Construction and Building Materials, vol. 106, pp. 89-101, 2016.
J. Liu, "Seismic behaviour of reinforced concrete columns," Ph.D. dissertation, 2013.
X. Ji, X. Cheng, and M. Xu, "Coupled axial tension-shear behavior of reinforced concrete walls," Engineering Structures, vol. 167, pp. 132-142, 2018.
H. Tobbi, A. S. Farghaly, and B. Benmokrane, "Behavior of Concentrically Loaded Fiber-Reinforced Polymer Reinforced Concrete Columns with Varying Reinforcement Types and Ratios," ACI Structural Journal, vol. 111, no. 2, 2014.
Y. Z. Murad, "Predictive model for bidirectional shear strength of reinforced concrete columns subjected to biaxial cyclic loading," Engineering Structures, vol. 244, p. 112781, 2021.
X. Su, H. Yang, Q. Liu, X. Wang, and J. Fu, "Experimental study on seismic behavior of reinforced concrete exterior beam-column joints under varying axial load," Engineering Structures, vol. 318, p. 118682, 2024.
X. Li, J. Dai, and M. Deng, "Shear behavior of high ductile fiber reinforced concrete beams," Alexandria Engineering Journal, vol. 60, no. 1, pp. 1665-1675, 2021.
J. C. M. Ho, "Limited ductility design of reinforced concrete columns for tall buildings in low to moderate seismicity regions," The Structural Design of Tall and Special Buildings, vol. 20, no. 1, pp. 102-120, 2011.
L. Sun, Z. Yang, Q. Jin, and W. Yan, "Effect of axial compression ratio on seismic behavior of GFRP reinforced concrete columns," International Journal of Structural Stability and Dynamics, vol. 20, no. 06, p. 2040004, 2020.
M. Shariq, F. Saifi, M. Alam, and S. M. Anas, "Effect of concrete strength on the dynamic behavior of axially loaded reinforced concrete column subjected to close-range explosive loading," Materials Today: Proceedings, vol. 87, pp. 1-8, 2023.
B. Li, E. Siu-Shu Lam, B. Wu, and Y. Y. Wang, "Effect of High Axial Load on Seismic Behavior of Reinforced Concrete Beam-Column Joints with and without Strengthening," ACI Structural Journal, vol. 112, no. 6, 2015.
H. O. Shin, Y. S. Yoon, W. D. Cook, and D. Mitchell, "Axial load response of ultra-high-strength concrete columns and high-strength reinforcement," ACI Structural Journal, vol. 113, no. 2, pp. 325, 2016.
N. Shatarat, H. Katkhuda, and M. Alqam, "Experimental investigation of reinforced concrete beams with spiral reinforcement in shear," Construction and Building Materials, vol. 125, pp. 585-594, 2016.
U. Akguzel and S. Pampanin, "Effects of variation of axial load and bidirectional loading on seismic performance of GFRP retrofitted reinforced concrete exterior beam-column joints," Journal of Composites for Construction, vol. 14, no. 1, pp. 94-104, 2010.
E. Osorio, J. M. Bairán, and A. R. Marí, "Analytical modeling of reinforced concrete columns subjected to bidirectional shear," Engineering Structures, vol. 138, pp. 458-472, 2017.
C. C. Hung and F. Y. Hu, "Behavior of high-strength concrete slender columns strengthened with steel fibers under concentric axial loading," Construction and Building Materials, vol. 175, pp. 422-433, 2018.
T. R. Mullapudi and A. Ayoub, "Modeling of the seismic behavior of shear-critical reinforced concrete columns," Engineering Structures, vol. 32, no. 11, pp. 3601-3615, 2010.
M. N. Hadi, W. Wang, and M. N. Sheikh, "Axial compressive behaviour of GFRP tube reinforced concrete columns," Construction and Building Materials, vol. 81, pp. 198-207, 2015.
C. Jin, Z. Pan, S. Meng, and Z. Qiao, "Seismic behavior of shear-critical reinforced high-strength concrete columns," Journal of Structural Engineering, vol. 141, no. 8, p. 04014198, 2015.
T. Dirikgil and O. Atas, "Experimental investigation of the performance of diagonal reinforcement and CFRP strengthened RC short columns," Composite Structures, vol. 223, p. 110984, 2019.
M. S. Abdulraheem, "Experimental investigation of fire effects on ductility and stiffness of reinforced reactive powder concrete columns under axial compression," Journal of Building Engineering, vol. 20, pp. 750-761, 2018.
W. C. Choi and H. D. Yun, "Compressive behavior of reinforced concrete columns with recycled aggregate under uniaxial loading," Engineering Structures, vol. 41, pp. 285-293, 2012.
W. Zhu, J. Jia, J. Gao, and F. Zhang, "Experimental study on steel reinforced high-strength concrete columns under cyclic lateral force and constant axial load," Engineering Structures, vol. 125, pp. 191-204, 2016.
K. Murugan and A. K. Sengupta, "Seismic performance of strengthened reinforced concrete columns," Structures, vol. 27, pp. 487-505, Oct. 2020.
S. S. Roudsari, S. A. Hamoush, S. M. Soleimani, and R. Madandoust, "Evaluation of large-size reinforced concrete columns strengthened for axial load using fiber reinforced polymers," Engineering Structures, vol. 178, pp. 680-693, 2019.
J. Shayanfar and H. Akbarzadeh Bengar, "Nonlinear analysis of RC frames considering shear behaviour of members under varying axial load," Bulletin of Earthquake Engineering, vol. 15, pp. 2055-2078, 2017.
Q. Shi, L. Ma, Q. Wang, B. Wang, and K. Yang, "Seismic performance of square concrete columns reinforced with grade 600 MPa longitudinal and transverse reinforcement steel under high axial load," Structures, vol. 32, pp. 1955-1970, Aug. 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Aldivonso Tambunan, Samsul Abdul Rahman Sidik Hasibuan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index