Gable Frame Structure Planning Using Lrfd Method in Pamekasan Factory Warehouse Project

Ahmad Ridwan; Nur Indah Mukhoyyaroh

doi:10.30736/cvl.v6i2.724

Gable Frame Structure Planning Using Lrfd Method in Pamekasan Factory Warehouse Project

Authors

Ahmad Ridwan Universitas Kadiri
Nur Indah Mukhoyyaroh

DOI:

https://doi.org/10.30736/cvl.v6i2.724

Abstract

Currently, the use of steel as a building construction has been widely used as the main material for building structures. Steel frames come in a variety of profiles and sizes. The use of steel frames can be adjusted to the type of construction to be built. From the results of the planning of the WF steel roof structure on the factory warehouse construction project in Pamekasan, it was obtained planning data: Gording using Profile C 125x50x40x4,5. Trekstang uses 8 mm diameter, Wind ties use 10mm diameter steel, Rafter uses WF 350x350x19x19 profile, column uses WF 350x350x19x19 profile, 8 pieces A325 bolts with 22 mm diameter, Hoist Crane Beam uses IWF Bulit-Up beam with 600x1144x18x22 profile, Base Plate uses a size of 500x500x8mm with a column of 600x600.

Downloads

Download data is not yet available.

Downloads

Article 7

PlumX Metrics

Published

2021-12-16

How to Cite

Ridwan, A., & Mukhoyyaroh, N. I. (2021). Gable Frame Structure Planning Using Lrfd Method in Pamekasan Factory Warehouse Project. Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan, 6(2), 225–244. https://doi.org/10.30736/cvl.v6i2.724

Download Citation

Issue

Vol. 6 No. 2 (2021): September

Section

Jurnal CIVILA

License

Authors who publish in this journal agree to the following terms:

1. Copyright on any article is held by the author.
2. The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
3. Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
5. Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License