Research Of Porous Concrete With Master Ease 5010 Mixed And Additional Rude Aggregate From Kedak Region

Authors

  • Hadi Mashuri Faculty of Engineering, Kadiri University
  • Ahmad Ridwan
  • Agata Iwan Candra
  • Faiz Muhammad Azhari
  • Ashabul Yamin

DOI:

https://doi.org/10.30736/cvl.v6i1.548

Keywords:

ACI 522R-10, Porous Concrete, Absorption, Compressive Strength, Master Ease 5010

Abstract

Porous Concrete is a type of Concrete that has a cavity in its structure that allows liquid to flow through the cavity. This study aims to determine the effect of adding Master Ease 5010 admixture on the compressive strength and absorption capacity of porous Concrete. The method used in this research is an experimental method by making different tests in the laboratory. The sample used is 10 x 20 cm with a concrete age of 28 days. The tests carried out include compressive strength testing and absorption testing. The absorption test used the falling head method based on the ACI 522R. The results of the normal compressive strength test = 0.28 Mpa, the addition of Master Ease 5010 3% = 0.31 Mpa, and the addition of Master Ease 5010 5% = 0.416 Mpa while testing the absorption of Normal Porous Concrete = 1.406 mm/s, addition of Master Ease 5010 3% = 1,946 mm/s, addition of Master Ease 5010 5% = 2.196 mm/s. From these results, it can be seen that the addition of Master Ease 5010 is able to increase the compressive strength and absorption value of porous Concrete.

Downloads

Download data is not yet available.

References

A. Hasyim and D. Kartikasari, “Pembuatan Beton Campuran Styrofoam Menggunakan Agregat Pasir Bengawan Solo,†UKaRsT, vol. 4, no. 1, p. 27, 2020, doi: 10.30737/ukarst.v4i1.697.

S. abadi Hasan and Hartantyo, “Pengaruh Limbah Pabrik Gula Molase Sebagai Bahan Tambah (Admixture) Kuat Tekan Beton K-175 Dengan Menggunakan Pasir Lokal Pasir Jombang,†U KaRsT, vol. 4, no. 1, pp. 14–26, 2020.

S. Winarto, A. I. Candra, E. Siswanto, and R. Ajiono, “Analysis Causes Damage and Prevention of Concrete,†J. Phys. Conf. Ser., vol. 1569, no. 4, 2020, doi: 10.1088/1742-6596/1569/4/042031.

A. I. Candra, S. W. Mudjanarko, Y. C. S. Poernomo, and P. Vitasmoro, “Analysis of the Ratio of Coarse Aggregate to Porous Asphalt Mixture,†J. Phys. Conf. Ser., vol. 1569, no. 4, 2020, doi: 10.1088/1742-6596/1569/4/042029.

A. Ridwan, A. I. Candra, E. Gardjito, and Suwarno, “Experimental Study Additional Brantas Sands of Clay Density,†J. Phys. Conf. Ser., vol. 1569, no. 4, 2020, doi: 10.1088/1742-6596/1569/4/042030.

A. I. Candra, H. Wahyudiono, S. Anam, and D. Aprillia, “KUAT TEKAN BETON Fc ’ 21 , 7 MPa MENGGUNAKAN WATER REDUCING AND HIGH RANGE ADMIXTURES,†J. CIVILA, vol. 5, no. 1, 2020.

A. I. Candra, A. Ridwan, S. Winarto, and Romadhon, “Correlation of Concrete Strength and Concrete Age K-300 Using Sikacim® Concrete Additive and Master Ease 5010,†J. Phys. Conf. Ser., vol. 1569, no. 4, 2020, doi: 10.1088/1742-6596/1569/4/042032.

M. Mulyati and Z. Arkis, “Pengaruh Metode Perawatan Beton Terhadap Kuat Tekan Beton Normal,†J. Tek. Sipil ITP, vol. 7, no. 2, pp. 78–84, 2020, doi: 10.21063/jts.2020.v702.05.

M. A. Ansori, A. Ridwan, and Y. Cahyo, “Penelitian Uji Kuat Tekan Beton Dengan Memanfaatkan Air Limbah Tetes Tebu Dan Zat Additive Concrete,†J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 1, p. 16, 2019, doi: 10.30737/jurmateks.v2i1.388.

A. Ginting, “Kuat Tekan dan Porositas Beton Porous dengan Bahan Pengisi Styrofoam,†J. Tek. Sipil, vol. 11, no. 2, pp. 76–98, 2019, doi: 10.28932/jts.v11i2.1404.

M. L. Heilig, “United States Patent Office,†ACM SIGGRAPH Comput. Graph., vol. 28, no. 2, pp. 131–134, 1994, doi: 10.1145/178951.178972.

E. P. Pratomo, A. Setyawan, and Djumari, “Pengaruh Gradasi Terhadap Porositas Dan Kuat Tekan Beton Berpori,†e-Jurnal, no. September, pp. 723–731, 2016.

R. Karimah and A. Prasojo, “Pembuatan Beton Porous Dengan Material Geopolimer,†J. Media Tek. Sipil, vol. 17, no. 1, 2019, doi: 10.22219/jmts.v17i1.7535.

L. A. Utama, A. I. Candra, and A. Ridwan, “Pengujian Kuat Tekan Pada Beton Dengan Penambahan Limbah Marmer Dan Serat Batang Pisang,†J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, p. 304, 2020, doi: 10.30737/jurmateks.v3i2.1150.

A. P. Wibowo, “BETON NON PASIR SEBAGAI MEDIA PERKERASAN HALAMAN RUMAH YANG RAMAH LINGKUNGAN,†pp. 87–91, 2013.

K. D. Kurniawan, A. Ridwan, and Y. Cahyo, “Uji Kuat Tekan Dan Arbsorpsi Pada Beton Ringan Dengan Penambahan Limbah Bata Ringan Dan Bubuk Talek,†J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 1, p. 1, 2020, doi: 10.30737/jurmateks.v3i1.872.

J. Kaufmann, “Evaluation of the combination of desert sand and calcium sulfoaluminate cement for the production of concrete,†Constr. Build. Mater., vol. 243, pp. 1–10, 2020, doi: 10.1016/j.conbuildmat.2020.118281.

T. Shane and R. Steffes, Vibration study for consolidation of portland cement, no. 970499. 1999.

O. Pospíchal, B. Kucharczyková, P. Misák, and T. Vymazal, “Freeze-thaw resistance of concrete with porous aggregate,†Procedia Eng., vol. 2, no. 1, pp. 521–529, 2010, doi: 10.1016/j.proeng.2010.03.056.

A. I. Candra, E. Gardjito, Y. Cahyo, and G. A. Prasetyo, “Pemanfaatan Limbah Puntung Rokok Filter Sebagai Bahan Campuran Beton Ringan Berpori,†UKaRsT, vol. 3, no. 1, p. 82, 2019, doi: 10.30737/ukarst.v3i1.365.

M. Isradi, A. Hidayat, and J. Prasetijo, “Guiding Paving Block Porous for Blind People,†HOLISTICA – J. Bus. Public Adm., vol. 11, no. 1, pp. 79–86, 2020, doi: 10.2478/hjbpa-2020-0007.

Y. Hanova and R. Franchitika, “Pengaruh campuran gradasi agregat terhadap permeabilitas beton porous pada aplikasi lantai laboratorium,†Rev. Civ. Eng., vol. 2, no. 2, pp. 86–89, 2018.

C. 49. ASTM, “Standard Specification for Chemical Admixtures for Concrete 1,†vol. 04, pp. 1–9, 2001.

M. Vricilia, A. Ridwan, and A. I. Candra, “Kuat Tekan Pelat Beton Menggunakan Pasir Wlingi dan Wiremesh Diameter 4 mm,†J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, p. 219, 2020, doi: 10.30737/jurmateks.v3i2.1099.

H. Widhiarto and B. Sujatmiko, “Analisis Campuran Beton Berpori Dengan Agregat Bergradasi Terpisah Ditinjau Terhadap Mutu Dan Biaya,†Anal. Campuran Bet. Berpori Dengan Agreg. Bergradasi Terpisah Ditinjau Terhadap Mutu Dan Biaya, vol. 53, no. 9, pp. 1689–1699, 2012, doi: 10.1017/CBO9781107415324.004.

F. D. Indriani, C. R. Nainggolan, and M. N. Wijaya, “Pengaruh Variasi Agregat Kasar Penyusun beton Terhadap Kerapatan Beton Dengan Menggunakan Transmission Time Pada Alat UPV (Ultrasonic Pulse Velocity),†Rekayasa Sipil, vol. 13, no. 1, pp. 32–39, 2019, doi: 10.21776/ub.rekayasasipil.2019.013.01.5.

Pratikto1 dan Indah Puspita Sari, “Beton Geopolimer Non-Pasir Untuk Buis Beton,†e-Jurnal, vol. 14, no. 1, p. 6, 2015.

K. Aprianti, E. Arifi, and D. Nuralinah, “Pengaruh Metode Two-Stage Mixing Approach (TSMA) terhadap Kuat Tekan Beton Porous dengan Variasi Komposisi Agregat Kasar Daur Ulang (RCA),†J. Mhs. Jur. Tek. Sipil, vol. 1, no. 2, p. pp-835, 2017.

E. Rommel, “Pembuatan Beton Ringan Dari Aggregat Buatan Berbahan Plastik,†J. Gamma, vol. 9, no. 1, pp. 137–147, 2013.

Downloads

PlumX Metrics

Published

2021-03-25

How to Cite

Mashuri, H., Ridwan, A., Candra, A. I., Azhari, F. M., & Yamin, A. (2021). Research Of Porous Concrete With Master Ease 5010 Mixed And Additional Rude Aggregate From Kedak Region. Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan, 6(1), 85–98. https://doi.org/10.30736/cvl.v6i1.548

Issue

Section

Jurnal CIVILA

Most read articles by the same author(s)

1 2 > >>