Asphalt Modification Using Low Liniear Density Polyethylene (LLDPE) Plastic And Cigarette Butt Filter Waste
DOI:
https://doi.org/10.30736/cvl.v6i1.546Keywords:
Asphalt modification, LLDPE Plastic, Cigarette butt waste, Marshall testAbstract
The development of technology in the transportation sector is increasingly advanced, many renewable innovations are continuously being developed. Various studies have been carried out to find the best solution for finding new innovations. The management of LLDPE plastic waste and cigarette filters into a modified asphalt mixture is an example of a renewable technology. The purpose of this study was to determine the impact of adding LLDPE plastic waste and cigarette filters into the modified asphalt mixture, with a variation of 20% LLDPE and cigarette filters 5%, 10%, 15%. The results showed that the addition of the mixture to the modified asphalt, there was a decrease in the value of Stability, MQ, VIM, VMA, VFB, and Flow.
Downloads
References
L. Fadhilah, A. Afif, S. Nurobingatun, H. Hariyadi, and A. Mufid, “Analisis Tebal Perkerasan Jalan Raya Magelang- Purworejo Km 8 Sampai Km 9 Menggunakan Metode Bina,†J. Perkerasan, vol. 1, no. 1, pp. 41–46, 2018.
B. A. Rahmahima, A. I. Candra, and Y. C. S. Poernomo, “Penggunaan Biji Jenitri Sebagai Pengganti Filler Pada Lapisan Aspal (Ac-Bc) Terhadap Variasi Suhu,†J. Manaj. Teknol. Tek. Sipil, vol. 3, no. 2, p. 177, 2020, doi: 10.30737/jurmateks.v3i2.1073.
A. S. Amal et al., “TERHADAP STABILITAS MARSHALL PADA ASPHALT TREATED BASE ( ATB ),†vol. 9, 2011.
E. W. Indriyati, “Pengaruh Asbuton Murni Terhadap Indeks Penetrasi Aspal,†vol. 17, no. 3, pp. 185–192, 2017.
H. Prasetyo et al., “PENGGUNAAN LIMBAH POLIETILEN DENSITAS TINGGI SEBAGAI PENGUBAH BITUMEN,†vol. 2, no. 1, pp. 67–76, 2018.
N. A. Kurniawan, S. Winarto, and A. Ridwan, “Penelitian penambahan bahan limbah tetes tebu dari pabrik gula meritjan pada campuran aspal beton,†Jurmateks, vol. 2, no. 1, pp. 96–105, 2019.
P. Pratomo, A. Hadi, and S. Diansari, “Aspal Modifikasi dengan Penambahan Plastik Low Liniear Density Poly Ethylene ( LLDPE ) Ditinjau dari Karakteristik Masrhall dan Uji Penetrasi pada Lapisan Aspal Beton ( AC-BC ),†Rekayasa, vol. 20, no. 3, pp. 155–166, 2016.
C. Yulianto, Y. Cahyo, A. Ridwan, and A. I. Candra, “SEBAGAI BAHAN PENGISI FILLER PADA CAMPURAN ASPAL,†vol. 1, no. 2, pp. 204–215, 2018.
S. Supriadi, Y. Cahyo, A. Ridwan, and A. I. Candra, “Penelitian Penambahan Bahan Batu Padas Pada Campuran Aspal Beton,†J. Manaj. Teknol. Tek. Sipil, vol. 2, no. 1, p. 154, 2019, doi: 10.30737/jurmateks.v2i1.407.
M. Zaenuri and A. Gunarto, “PENELITIAN MENGGUNAKAN BATU GAMPING SEBAGAI AGREGAT KASAR DAN FILLER PADA ASPAL CAMPURAN AC-BC,†U KaRsT, vol. 2, no. 1, pp. 28–37, 2018.
G. Tarigan, “PENGARUH PENGGUNAAN AGREGAT ALAM PADA CAMPURAN ASPAL BETON TERHADAP,†pp. 170–173, 2019.
M. Zaenuri, “Penelitian Penggunaan Batu Gamping Sebagai Agregat Kasar Dan Filler Pada Aspal Campuran,†UKaRsT, vol. 2, no. 1, 2018, doi: 10.30737/ukarst.v2i1.357.
S. A. Nugroho, “Variasi Kadar Aspal Pada Perkerasan Lentur,†Media Komun. Tek. Sipil, vol. 14, no. 3, pp. 213–223, 2005.
S. A. A. Hasan and S. D. Hartantyo, “Alternatif Penggunaan Agregat Halus Batu Kapur Mantup Dalam Campuran Aspal Panas Ac-Wc,†U KaRsT, vol. 4, no. 1, pp. 559–570, 2020.
M. Aminuddin, S. Winarto, and Y. Cahyo, “Job Mix Laston (Ac-Bc) Menggunakan Bubuk Gypsum Dan Abu Bata Merah,†J. Manaj. Teknol. Tek. Sipil, vol. 1, no. 2, pp. 325–336, 2018, doi: 10.30737/jurmateks.v1i2.420.
S. D. Hartantyo and R. Hepiyanto, “Studi bahan tambah serat eceng gondok pada laston tipe xi terhadap indeks marshall test menggunakan kerikil mantup,†U KaRsT, vol. 2, no. 2, pp. 135–144, 2018.
A. M. Siregar, W. Ritonga, and D. Surahman, “Pembuatan Dan Karakterisasi Modifikasi Aspal Penetrasi 60-70 Dengan Karet Alam Bandar Betsy,†Pros. Semin. Nas. Fis., vol. 4, pp. SNF2015-VII, 2015.
J. E. Waani, “Evaluasi Volumetrik Marshall Campuran AC-BC,†J. Teor. dan Terap. Bid. Rekayasa Sipil, vol. 20, no. 1, pp. 67–78, 2013.
H. Cahyadi and S. W. Kasuma, “Penggunaan Kapur Padam Sebagai Pengganti Filler Pada Campuran AC-WC,†Media Ilm. Tek. Sipil, vol. 7, no. 1, pp. 27–34, 2018, doi: 10.33084/mits.v7i1.682.
S. Fitri, S. M. Saleh, and M. Isya, “Pengaruh Penambahan Limbah Plastik Kresek Sebagai Subsitusi Aspal Pen 60/70 Terhadap Karakteristik Campuran Laston Ac – Bc,†J. Tek. Sipil, vol. 1, no. 3, pp. 737–748, 2018, doi: 10.24815/jts.v1i3.10034.
G. S. Muaya, O. H. Kaseke, and M. R. E. Manoppo, “Pengaruh Terendamnya Perkerasan Aspal oleh Air Laut yang Ditinjau Terhadap Karakteristik Marshall,†J. Sipil Statik, vol. 3, no. 8, pp. 562–570, 2015.
K. Riset et al., “PENGARUH PENGGUNAAN PLASTIK HIGH DENSITY POLYETHYLENE PADA LAPIS ASPAL BETON AC-WC TERHADAP KARAKTERISTIK MARSHALL Muhammad Zaky Elhamy PENGARUH PENGGUNAAN PLASTIK HIGH DENSITY POLYETHYLENE PADA LAPIS ASPAL BETON AC-WC Muhammad Zaky Elhamy,†2018.
S. DIANSARI and J. T. S. U. Sipil, “ASPAL MODIFIKASI DENGAN PENAMBAHAN PLASTIK LOW LINIEAR DENSITY POLY ETHYLENE (LLDPE) DINTINJAU DARI KARAKTERISTIK MARSHALL DAN UJI PENETRASI PADA LAPISAN ASPAL ASPAL BETON (AC-BC),†p. 67, 2016.
S. Anam and H. Pratikto, “Pengujian Perkerasan Aspal Porus Dengan Penambahan Tread Ban Bekas Pada Uji Marshall,†U KaRsT, vol. 2, no. 2, pp. 154–163, 2018.
S. Bahri, “Pemanfaatan Limbah Serbuk Besi Sebagai Agregat Halus Pada Campuran Aspal Panas,†Inersia, J. Tek. Sipil, vol. 9, no. 2, pp. 39–46, 2019, doi: 10.33369/ijts.9.2.39-46.
M. Aminsyah, “Analisa Kehancuran Agregat Akibat Tumbukan Dalam Campuran Aspal,†J. Rekayasa Sipil, vol. 9, no. 2, p. 50, 2013, doi: 10.25077/jrs.9.2.50-71.2013.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish in this journal agree to the following terms:
-
- Copyright on any article is held by the author.
- The author grants the journal first publication rights with the work licensed concurrently under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of authorship and initial publication of the work in this journal.
- Authors may make separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of that journal (for example, posting it to an institutional repository or publishing it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (for example, in an institutional repository or on their website) before and during the submission process, as doing so can lead to productive exchange, as well as earlier and greater citation of the published work.
- Published articles and related materials distributed under a Creative Commons Attribution-ShareAlike 4.0 International License
Civilla (Jurnal Teknik Sipil Universitas Islam Lamongan) by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index