STUDI PENCAMPURAN SERAT ECENG GONDOK SISTEM HOT ROLLED SHEET BC SPESIFIKASI SEKSI-6 : 2010 BINA MARGA

Authors

  • Heru Prasetyo Universitas Islam Lamongan
  • Samsul Arif Universitas Islam Lamongan

DOI:

https://doi.org/10.30736/cvl.v3i2.256

Keywords:

Bina Marga 2010 Division - 6, Hot Rolled Sheets, Marshall Properties, Fibers Sellulosa

Abstract

HRS-BC (Hot Roller Sheet) is a type of flexible pavement construction because it uses asphalt as a binder between the aggregates. This study uses water hyacinth as a substitute for cellulose fiber in the mixture of HRS-BC. The purpose of this study is to determine the effect of water hyacinth cellulose fiber in HRS mixture to the Marshall characteristics. This research uses trial and error method, resulting 7.19 % asphalt content to the total aggregate weight with the variation of cellulose fibers are 3%, 4%, 5%, 6% and 7%. Marshall Test is performed to determine the effect of adding the cellulose fiber in the mixture to the components of Marshall Properties, for example Marshall Stability, % of Void Filed With Asphalt (VFWA), % of Void in The Mix (VIM), Plastic Fatigue (Flow), and Marshall Quotient (MQ).The result of this study is Marshall evaluation where the greatest score is obtained for stability of 1601 kg, flow of 4.60 mm, Quotient Marshall of 375.44 kg/mm, VMA of 20.45%, VFWA of 86.79 %, and VIM score of 4.19 %. It shows that the best cellulose fiber content is 3 % of asphalt level of 7,19 % and has been in accordance with Bina Marga 2010 Division 6 specification and can be used in asphalt mixture of HRS-BC.

Downloads

Download data is not yet available.

Author Biographies

Heru Prasetyo, Universitas Islam Lamongan

Teknik Sipil Universitas Islam Lamongan

Samsul Arif, Universitas Islam Lamongan

Teknik Sipil Universitas Islam Lamongan

References

Andri, et.al.2012. Pengaruh Penggunaan Kapur Sebagai Bahan Pengisi (Filler) Terhadap Karakteristik Campuran Beton Aspal Lapis Aus (AC-WC). Jurnal Rekayasa dan Manajemen Transportasi Volume II No. 2, Juli 2012 Hal. 87 – 104. Jurusan Teknik Sipil Universitas Tadulako, Palu

Bina Marga., 2010. Spesifikasi Umum Direktorat Jenderal Bina Marga Edisi 2010 Divisi 6. Kementrian Direktorat Jendral Pekerjaan Umum Indonesia.

BSSNI, 2002. SKSNI 13–6717–2002. Tata Cara Penyiapan Benda Uji Dari Contoh Agregat

BSSNI, 2008. SK SNI 1970-2008. Cara Uji Berat JenisDan Penyerapan Air Agregat Halus

BSSNI, 2008. SKSNI 1969-2008. Cara Uji Berat Jenis Dan Penyerapan Air Agregat Kasar

BSSNI, 2011. SKSNI 2433-2011. Cara uji titik nyala dan titik bakar aspal dengan alat cleveland open cup

BSSNI, 2011. SKSNI 2441-2011. Tentang Cara Uji Berat Jenis Aspal Keras

BSSNI, 2011. SKSNI 2456-2011. Tentang Cara Uji Penetrasi Aspal

Sukirman., 1999. Perkerasan Lentur Jalan Raya.Penerbit NOVA. Bandung

PlumX Metrics

Published

2018-10-16

How to Cite

Prasetyo, H., & Arif, S. (2018). STUDI PENCAMPURAN SERAT ECENG GONDOK SISTEM HOT ROLLED SHEET BC SPESIFIKASI SEKSI-6 : 2010 BINA MARGA. Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan, 3(2), 146–153. https://doi.org/10.30736/cvl.v3i2.256

Issue

Section

Jurnal CIVILA