Analisa Meningkatnya Rugi-Rugi Daya Akibat Jatuh Tegangan Pada Proses Transmisi 150 KV Maligi-Indoliberty
DOI:
https://doi.org/10.30736/je-unisla.v6i2.690Keywords:
Electrical energy, Transmission, Voltage drop, Power lossAbstract
 Tariffs are one of the driving forces of the economy, so electrical energy providers should be more effective in presenting electrical energy so that the basic electricity tariffs can be cheaper, one way is to reduce power losses in the transmission process. power losses arise because the transmission conductor has resistance values, power losses can increase if the voltage in the transmission system decreases, in the case study taken at PT PLN (Persero) UPT Karawang Gardu Induk (GI) 150 KV maligi the direction of the conductor Indoliberty 150 KV transmission when the average load in one day is 18.85 MW and 10.01 MVAr there is a power loss of 7065.05 W in one day when the voltage is 150 KV, and power losses increase by 411.17 W when there is avoltage drop of 2.8766% from a voltage of 150 KV to 145.82 KV which increases the cost loss of Rp. 9838,396 per day.
Downloads
References
Abdullah, D., & Badaruddin, B. (2020). Analisa Perbaikan Penampang Penghantar Guna Mengurangi Drop Tegangan dan Simulasi Etap 16.0 Pada JTR GD KRDB di Wilayah Kerja PT. PLN (Persero) ULP Serang Kota.
Daniel Dalam, H. (2013). Analisis Susut Energi Pada Sistem Jaringan Distribusi Di Pt. Pln Apj Yogyakarta Upj Wonosari
Unit Semanu. Seminar Nasional Informatika Yogyakarta, 2013(semnasIF), 1979–2328.
Gaol, D. S. L., Firdaus. (2017). Estimasi Rugi Rugi Energi Pada Sistem Distribusi Radial 20 Kv Dengan Metode Loss Factor. Jom FTEKNIK, 4(2), 1–6.
Hariyadi, S. (2017). Analisis Rugi-Rugi Daya Dan Jatuh Tegangan Pada Saluran Transmisi Tegangan Tinggi 150 Kv Pada Gardu Induk Palur – Masaran. Universitas Muhammadiyah Surakarta, 1, 20.
Hayadi, A. (2013). Analisis Rugi-Rugi Energi Sistem Distribusi. 1–6.
Kartoni, J., Ervianto, E. (2016). Analisa Rekonfigurasi Pembebanan Untuk Mengurangi Rugi-Rugi Daya Pada Saluran Distribusi 20 Kv. Jom FTEKNIK, 3(2), 1.
Mardhatillah, M. F., & Ervianto, E. (2017). Analisa Rugi-rugi Daya Feeder Lobak Pada Jaringan PT . PLN ( Persero ) Area Pekanbaru. Jom FTEKNIK, 4(2), 1–10.
Nopianto, A. S. (2016). Perhitungan Jatuh Tegangan Dan Susut Daya Serta Upaya Perbaikan Penyaluran Daya Listrik Pada PT. PLN (Persero) Rayon Sambas. Untan, 2, No 1.
S, D. A., & Ervianto, E. (2016). Dengan Pendekatan Kurva Beban Pada Jaringan Distribusi Pt . Pln ( Persero ) Area Pekanbaru. Jurnal Teknik Elektro, 3(2), 1–6.
Shidiq, M. (2010). Penurunan Jatuh Tegangan Dan Rugi Daya. Jurnal EECCIS, IV(1), 35–38.
Syaputra, A., & Ervianto, E. (2017). Perhitungan Rugi Daya Saluran Distribusi Primer 20 kV Feeder Adi Sucipto di GI Garuda Sakti Dengan Metode Ladder Iterative Technique. Jom FTEKNIK, 4(1), 1–10.
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
