Visual Inspection dan Pengujian Tahanan Isolasi Pemutus Tenaga (PMT) Bay 150 KV Kopel
DOI:
https://doi.org/10.30736/je-unisla.v6i2.691Keywords:
Circuit Breaker, Insulation Resistance, PMTAbstract
Electrical energy is a primary need to supply all aspects of community needs andactivities for electricity. For this reason, maintenance is carried out to improve efficiency, quality, and distribution of electrical power. The PMT at thesubstations is used as a mechanical switch or as a circuit breaker. The method
used in this study was qualitative and quantitative to determine the presence of anomalies in electrical distribution. Based on in service/visual inspection, the condition of the equipment is good visually, and there is no anomalies were found. Testing at an insulation resistance, the rise and fall of the measurement results can be caused by several factors such as the wrong position of the measuring instrument, a dirty insulator body, or high humidity levels.
Downloads
References
Ariyanto, Eri. 2019. Pengujian Tahanan Isolasi dan Keserempakan Pemutus Tenaga 150 kV Bay Palur 1 dan Palur 2 Gardu Induk. Publikasi Ilmiah. Surakarta: Universitas Muhammadiyag Surakarta.
IEEE Standard Definitions for Power Switchgear, IEEE C37.100-1992. International Electrotechnical Commission.
Circuit-Breaker. IEV ref 441-14-20.
Liliana, Sunari. 2013. Analisa RPN Terhadap Keandalan Peralatan Pengaman Jaringan Distribusi dengan Metode FMEA PLN Cabang Pekanbaru Rayon Panam. Vol. 10, No. 2. Pekanbaru: UIN
Sultan Syarif Kasim Riau PT PLN (Persero). 2014. Himpunan Buku
Pedoman Pemeliharaan Peralatan Primer Gardu Induk. Jakarta: Direksi PT PLN (Persero).
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
