Experimental Study of Concrete Making Using Recycled Coarse Aggregate

Authors

  • Moch Reza Maskur Civil Engineering Faculty of Kadiri University
  • Zendy Bima Mahardana Civil Engineering Faculty of Kadiri University http://orcid.org/0000-0001-7423-7586
  • Ibra Dewandono Civil Engineering Faculty of Kadiri University
  • Afan Ridlo Abdulloh Civil Engineering Faculty of Kadiri University
  • Mochamad Akbar Civil Engineering Faculty of Kadiri University
  • Moch Okhynawa Civil Engineering Faculty of Kadiri University
  • Ronaldin Lindimeha Civil Engineering Faculty of Kadiri University

DOI:

https://doi.org/10.30736/cvl.v7i2.858

Keywords:

Coarse aggregate, compressive strength, concrete, recycled concrete aggregate

Abstract

Concrete is a form of construction in the form of a composite material consisting of a mixture of fine aggregate, coarse aggregate, cement, and water. However, in certain cases, the concrete application is often a problem, especially the lack of a minimal amount of coarse aggregate material, increasing material prices. Recycled concrete aggregate (RCA) is an embodiment of concrete composed of recycled materials. Recycled material is obtained from fragments or remnants of the demolition of unused concrete. The method used to make concrete from the constituent materials using concrete waste as coarse aggregate per the rules of science is experimental. The tests are the aggregate moisture content test, the mud content test, the coarse aggregate abrasion test, the slump test, and the concrete compressive strength test at 28 days of treatment. The compressive strength results showed that the normal concrete sample could reach FC 18.53 MPa. The concrete sample using recycled coarse aggregate reached FC 23.79 MPa, so using recycled materials for manufacturing concrete can achieve the planned target

Downloads

Download data is not yet available.

Author Biographies

Moch Reza Maskur, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Zendy Bima Mahardana, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Ibra Dewandono, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Afan Ridlo Abdulloh, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Mochamad Akbar, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Moch Okhynawa, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

Ronaldin Lindimeha, Civil Engineering Faculty of Kadiri University

Civil Engineering Faculty of Kadiri University

References

D. Pedro, J. de Brito, and L. Evangelista, “Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: Mechanical, durability and long-term properties,†Constr. Build. Mater., vol. 154, pp. 294–309, 2017, doi: 10.1016/j.conbuildmat.2017.07.215.

L. N. Koutas, Z. Tetta, D. A. Bournas, and T. C. Triantafillou, “Strengthening of Concrete Structures with Textile Reinforced Mortars: State-of-the-Art Review,†J. Compos. Constr., vol. 23, no. 1, p. 03118001, 2019, doi: 10.1061/(asce)cc.1943-5614.0000882.

H. Guo et al., “Durability of recycled aggregate concrete – A review,†Cem. Concr. Compos., vol. 89, pp. 251–259, 2018, doi: 10.1016/j.cemconcomp.2018.03.008.

F. M. Khalaf and A. S. DeVenny, “Recycling of Demolished Masonry Rubble as Coarse Aggregate in Concrete: Review,†J. Mater. Civ. Eng., vol. 16, no. 4, pp. 331–340, 2004, doi: 10.1061/(asce)0899-1561(2004)16:4(331).

K. Ouyang et al., “An overview on the efficiency of different pretreatment techniques for recycled concrete aggregate,†J. Clean. Prod., vol. 263, p. 121264, 2020, doi: 10.1016/j.jclepro.2020.121264.

K. P. Verian, W. Ashraf, and Y. Cao, “Properties of recycled concrete aggregate and their influence in new concrete production,†Resour. Conserv. Recycl., vol. 133, no. October 2017, pp. 30–49, 2018, doi: 10.1016/j.resconrec.2018.02.005.

J. Xiao, W. Li, Y. Fan, and X. Huang, “An overview of study on recycled aggregate concrete in China (1996-2011),†Constr. Build. Mater., vol. 31, pp. 364–383, 2017, doi: 10.1016/j.conbuildmat.2011.12.074.

S. T. Deresa, J. Xu, C. Demartino, Y. A. Heo, Z. Li, and Y. Xiao, “A review of experimental results on structural performance of reinforced recycled aggregate concrete beams and columns,†Adv. Struct. Eng., vol. 23, no. 15, pp. 3351–3369, 2020, doi: 10.1177/1369433220934564.

ASTM C 566-97, “Astm C 566-97,†Stand. test method Total evaporable moisture content Aggreg. by Dry., vol. i, no. Reapproved, p. 3, 2004.

SNI 1971-2011, “Cara Uji Kadar Air Total dengan Pengeringan,†Badan Stand. Nas. Indones., p. 6, 2011.

G. H. de Rooij, “Methods of Soil Analysis. Part 4. Physical Methods,†Vadose Zo. J., vol. 3, no. 2, pp. 722–723, 2017, doi: 10.2136/vzj2004.0722.

ASTM C131/C131M-14, “C131/C131M-14 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine,†ASTM Int., vol. 04, no. Note 2, pp. 5–8, 2014, doi: 10.1520/C0131.

Badan Standardisasi Nasional, “SNI 2493-2011: Tata Cara Pembuatan dan Perawatan Benda Uji Beton di Laboratorium,†Badan Standar Nas. Indones., p. 23, 2011, [Online]. Available: www.bsn.go.id.

ASTM C39/C39M, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens 1,†ASTM Stand. B., vol. i, no. March, pp. 1–5, 2003.

D. V. Mallikarjuna Reddy and M. Manikanta Sai Swaroop, “Effect of Recycled Aggregates on Strength and performance of Recylced Aggregate Concrete,†E3S Web Conf., vol. 184, pp. 4–7, 2020, doi: 10.1051/e3sconf/202018401085.

M. Etxeberria, E. Vázquez, A. Marí, and M. Barra, “Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete,†Cem. Concr. Res., vol. 37, no. 5, pp. 735–742, 2007, doi: 10.1016/j.cemconres.2007.02.002.

Z. Li and F. Chen, “Research on Mix Design of Cement Stabilized Recycled Aggregate Pavement Base,†IOP Conf. Ser. Earth Environ. Sci., vol. 781, no. 2, 2021, doi: 10.1088/1755-1315/781/2/022046.

Badan Standardisasi Nasional, “SNI 3419-2008 : Cara Uji Abrasi Beton di Laboratorium,†Badan Stand. Nas., 2008.

F. Bendahmane, D. Marot, and A. Alexis, “Experimental Parametric Study of Suffusion and Backward Erosion,†J. Geotech. Geoenvironmental Eng., vol. 134, no. 1, pp. 57–67, 2008, doi: 10.1061/(asce)1090-0241(2008)134:1(57).

Astm-c-136-06, “Astm-C-136-06-Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.†.

D. Marchon, S. Kawashima, H. Bessaies-Bey, S. Mantellato, and S. Ng, “Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry,†Cem. Concr. Res., vol. 112, no. December 2017, pp. 96–110, 2018, doi: 10.1016/j.cemconres.2018.05.014.

SNI-1972:2008, “Cara Uji Slump Beton,†2008.

D. P. A. K. R. B. Herath, “Estimation of rheological properties of self-compacting concrete using slump and slump flow tests,†2017 6th Natl. Conf. Technol. Manag. Malabe, Sri Lanka, 2017.

J. B. Pereira and G. de F. Maciel, “Measurement of concrete consistency through an automated slump test device: their validation and potentialities,†Rev. Mater., vol. 26, no. 4, 2021, doi: 10.1590/S1517-707620210004.1388.

H. Facility, S. Researcher, H. Facility, and H. Facility, “Estimation of the Compressive Strength of Concrete Using Shear Wave Velocity Ji-Hwan An 1 , Jeong-Hee Nam 2 , Soo-Ahn Kwon 3 , and Sung-Ho Joh 4,†pp. 154–164, 2009.

Downloads

PlumX Metrics

Published

2022-09-15

How to Cite

Reza Maskur, M., Bima Mahardana, Z., Dewandono, I., Ridlo Abdulloh, A., Akbar, M., Okhynawa, M., & Lindimeha, R. (2022). Experimental Study of Concrete Making Using Recycled Coarse Aggregate. Civilla : Jurnal Teknik Sipil Universitas Islam Lamongan, 7(2), 129–138. https://doi.org/10.30736/cvl.v7i2.858

Issue

Section

Jurnal CIVILA