Studi Analisis Perbandingan Rugi Daya Pada Titik Sambung Pierching Connector Dengan Line Tap Connector Pada Jaringan Tegangan Rendah
DOI:
https://doi.org/10.30736/je.v3i1.215Keywords:
distribution network, connector, measurement and lossesAbstract
Distribution system is divided into primary and secondary distribution networks. The primary distribution network is the network of the substation to the distribution, while the secondary distribution is the channel network from the substation transformer is distributed to the consumer or the load. Primary distribution network is better known as medium voltage network (JTM 20kV) while secondary distribution is low voltage network (JTR 220 / 380V). The distribution network is part of the power system closest to the customer or the load compared to the transmission network.
At this time PT. PLN (Persero) experiencing power loss that occurs at the point of connection of low voltage on the use of pierching connector. This study is to analyze the calculation of loss of  power at low voltage network (JTR) by doing comparison of measurement between input with output at connection point of pierching connector with line tap connector. For conditions required evaluation and analysis for replanning that takes into account the planning criteria such as voltage  drop and take into account the loss of power.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System is licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially. This license is acceptable for Free Cultural Works.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Copyright
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under an Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Creative Commons License
Jurnal JE-UNISLA : Electronic Control, Telecomunication, Computer Information and Power System by Universitas Islam Lamongan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://jurnalteknik.unisla.ac.id/index.php/CVL/index
